Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 50)

50 Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 4 Component Replacement
Replace the RTC Battery The computers use nonvolatile memory that requires a real-time clock (RTC)
lithium battery to retain system information when power is removed. The RTC
battery is next to the SO-DIMM1 slot.
This battery is intended to be replaced during the life of the computer. The
battery life depends on the amount of time the computer is on, or on-time.
If the computer does not retain the correct time and date, replace the battery.
ATTENTION: A risk of fire and chemical burn exists if the battery is not handled
properly:
• Do not disassemble, crush, puncture, or short external contacts.
• Do not expose the battery to temperatures higher than the rated temperature
ranges in Table 13 on page 110 .
• Do not dispose of a used battery in water or fire.
For safety information on handling lithium batteries, see Guidelines for Handling
Lithium Batteries, publication
AG-5.4 .
On-time
(hrs/wk) Expected Battery
Life (yrs)
0 4
40 5.5
80 7