Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 85)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 85
UEFI Set-up Utility Chapter 5
Make a Backup
Follow these steps to back up the system image.
1. Click the AMI Rescue menu to access the AMI Rescue screen.
2. Click Make a Backup.
3. In the Source to Backup From field, click Browse to locate the backup
source.
The default backup source is the hidden partition on your hard drive.
4. In the Destination of Image File field, click Browse to locate the
destination source.
The default destination source is the hidden partition on your hard drive.
5. Click Backup Now to start the backup process.
IMPORTANT Any USB mass storage drive must be formatted as FAT32, have a drive
label other than ‘Recovery’, and be non-blank.
IMPORTANT A warning appears if there is not enough free space on the destination
source.