Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 86)

86 Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 5 UEFI Set-up Utility
Restore from an Image
Perform the following steps to restore your computer from a system image backup.
1. Click the AMI Rescue menu to access the AMI Restore screen.
2. Click Restore from an Image.
3. In the Source of Image File field, click Browse to locate the image source.
The default image source is the hidden partition on your hard drive.
4. In the Destination of Restore Data field, click Browse to locate the
destination source.
The default destination source is the primary partition on your hard drive.
5. Click Restore Now to start the restoration process.
IMPORTANT Restoring from a back-up image completely replaces any existing data on the
target drive. Make sure all data is backed up before proceeding with the
following steps.
IMPORTANT Any USB mass storage drive must be formatted as FAT32, have a drive
label other than ‘Recovery’, and be non-blank.
IMPORTANT A warning appears if there is not enough free space on the destination
source.