Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual - Manual (Page 205)

Publication 2093-UM001A-EN-P — March 2007
Upgrading Firmware 205
2. Enter 3) to select Flash Upgrade. The following dialog opens.
3. Enter 0), as the 2093 SERVO (Kinetix 2000) was identified earlier. The
following dialog appears.
4. Select Y, when you are ready to perform the function and have found
the firmware file. The screen to the right of the (Y/N) will fill with the
character C to indicate it is waiting to download.
5. From the Transfer menu, select Send File.
IMPORTANT
As displayed in the dialog above, you have 1 minute to start
the transfer. If you do not start the file transfer within this
time, you must repeat the previous sequence fromstep 1.