Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual - Manual (Page 206)

Publication 2093-UM001A-EN-P — March 2007
206 Upgrading Firmware
6. Browse for your firmware upgrade file. For Hyperterminal, the file must
be a binary or extension a. (Only SERCOS ControlFLASH has the
extension nvs.).
7. Select Xmodem as the transfer Protocol.
8. Click Send to start the flash upgrade.
The following dialog opens. It is followed by additional dialogs that
detail the progress of the flash upgrade.
ATTENTION
To avoid unrecoverable drive module faults, do not interrupt
control power to the IAM, power to the 1203-SSS SCANport
adapter, or power to your computer while the flash upgrade is
in progress.