Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual - Manual (Page 215)

Publication 2093-UM001A-EN-P — March 2007
DC Common Bus Applications 215
6. Select the Value Edit tab and enter the Add Bus Cap Value ( μF).
7. Click OK, and verify the correct Add Bus Cap value is displayed in the
Node, Port, Axis hierarchy.
Save the Add Bus Cap Parameter to Non-volatile Memory
Follow these steps to save the Add Bus Cap parameter to non-volatile
memory.
1. From the menu bar choose Actions\Non-volatile Memory.
The following message dialog opens.
2. Click Save.
The changes are saved to non-volatile memory and the following
cautionary message dialog opens.
3. Click Yes.
The save to non-volatile memory is complete and the following
confirmation message dialog opens.
4. Click OK.
5. Close the DriveExplorer software.