AJA Ki Pro - Manual (Page 86)

Ki Pro v3.2 www.aja.com 86
802.11 IP Config (54.1): Shows the type of IP address (DHCP, Static, or default)
Hide 802.11 Password (53.4): This parameter hides the 802.11 Password parameter.
802.11 MAC Address (50.7): This parameter is an information only field showing the MAC address of the wireless
adapter.
802.11 Security (53.3): This parameter defines the type of security (encryption/format) , if any, used between Ki
Pro, the access point and the wireless browser clients. Choose the same type of security
used by the network router, and enter a password in the 802.11 Password parameter
(53.4), if required.
802.11 IP Address (54.2): Use this field to enter the static IP address used by Ki Pro for TCP/IP networking.
802.11 Netmask (54.3): This parameter determines the subnet mask used by Ki Pro for TCP/IP networking.
802.11 Password (53.4): This parameter defines the password used between Ki Pro, the access point and wireless
browser clients—if any. Field is only displayed if Security is enabled.
Available 802.11 Networks
(53.0):
This parameter defines the wireless network or “SSID” that Ki Pro will connect to via the
access point.
802.11 Network (53.2, SSID): This parameter defines the wireless network or “SSID” that Ki Pro will connect to via the
access point. The SSID is the public name of the wireless network.
Apply:: Clicking this button updates the Ki Pro with any changes you’ve made on the “Wireless”
screen.
Playlists Screen
The Playlists All Clips screen allows you to see at a glance all of the clips on the currently
selected media as chosen by the SLOT button (see Transport screen). You can also create
new playlists consisting only of the clips you choose:
1. Click add (+) below the Playlists heading and enter a name for the new playlist.
2. Next, to select a clip to be added to a playlist, double-click the clip in the All Clips list
to select it; you will know when it is selected as it will be highlighted in blue.
3. Next, click and drag the selected clip onto the playlist. You can also drag multiple
clips by clicking the check boxes to the left of the names of the clips you want to copy
before dragging them. Note that while in the click and drag operation, a filmstrip
icon will appear (only in some browsers) and it will disappear once you have added
the clip to the list. You will also see the Playlist being added to highlighted in green
when the addition is made.
4. After adding the clips you want, click the playlist name to open the playlist; the clips
you added will be listed.
Warning!
Do not touch the Ki Pro radio or antenna cover when the antenna is transmitting or
receiving.
Warning!
Install this device in such a manner as to maintain a minimum of 5 cm (2 inches)
separation distance between the radiating element(s) and all persons. This safety
warning conforms with FCC radio frequency exposure limits.