Balboa Water Group Decorative Escutcheon - Manual

DECORATIVE ESCUTCHEON
INSTALLATION INSTRUCTIONS
REMOVE THE EXISTING PLASTIC EYEBALL AND RETAINING RING. 1.
PLACE THE O-RING IN THE HOLE FROM WHICH THE PLASTIC EYEBALL CAME. 2.
PLACE THE EYEBALL ON TOP OF THE O-RING. 3.
CENTER THE ESCUTCHEON PLATE OVER THE FACE OF THE WALL FITTING, AND TIGHTEN 4.
UNTIL SNUG.
CAUTION: DO NOT USE ABRASIVE OR CAUSTIC CLEANSERS ON DECORATIVE ESCUTCHEONS
AS THEY WILL DAMAGE THE FINISH AND VOID THE WARRANTY.
88-4024 Rev A June 30, 2009