Brother DCP-8045D - Manual (Page 70)

5 - 14 MAKING COPIES
Duplex (1 in 1) (For DCP-8045D)
Making a double-sided copy from a single-sided original
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Use the numeric keys to enter the number of copies you want
(up to 99).
3
Press Duplex/N in 1 and or to select
Duplex(1 in 1) .
Press Set .
4
Press or to select Portrait2 or Landscape1 .
Press Set .
—OR—
Press or to select Portrait1 or Landscape2 , and
then go to Step 6.
5
Press or to select Single Sided for the original.
(If you are using the scanner glass or changed the number of
copies at Step 2, this option will not appear.)
Press Set .
6
Press Start . The DCP starts scanning.
If you are using the ADF, the DCP starts printing the copy.
—OR—
If you placed the original on the scanner glass, go to Step 7.
7
Place the next original on the
scanner glass.
Select 1 and press Set or press 1 .
Repeat Step 7 for each page of the
original.
8
After all the pages of the original have been scanned,
select
2 and press Set , or press 2 , to print the copy.
2
1
1
2
Flatbed Copy:
Next Page?
▲ 1.Yes
▼ 2.No
Select ▲▼ & Set