Bulldog Security 1402 - Manual (Page 2)

‘ ‘
‘ ‘
CONTENTS
3
System Features ...............................................4-5
System Components.............................................6
Required Tools.....................................................6
Technical Assistance .............................................6
Before You Begin...............................................6-7
Precautions ......................................................7-8
Testing Your Wires ...............................................8
Making Connections .........................................8-10
Locating & Making Connections .........................10-18
Connecting Wiring Harness ...................................18
Testing Door Locks .........................................18-19
Connecting Door Locks....................................20-21
Using Your Remote Transmitter.........................22-26
4
SYSTEM FEATURES
2 Four-Button Control your car from an extended
Extended Range distance.
Remote Control
Keyless Entry Remotely locks and unlocks your power
door locks.
Remote Locking Remotely locks your power door locks
and Unlocking when the ignition is turned on and unlocks
with Ignition your power door locks when the ignition
Switch is turned off. NOTE: This feature can also
be used while the unit is wired as an
alarm.
Remote Valet Lets you program off the alarm section
when it is not needed.
Remote Full Time This system will perform all its functions
Silent Arming except no chirping when arming or
disarming the system.
Remotely Automatically arms the system one
Programmable minute after the last door is closed.
Passive Arming
Last Door When the last door is closed, a series of
Indicator beeps or chirps (long, short, long) will
Programmable be heard when the unit is programmed
for passive arming.
Automatic If the same zone is violated three times
Annoyance while the system is armed, that Override
zone will be deactivated until the unit is
disarmed and rearmed.