Blizzard Lighting WallFlower (Rev A) - Manual

Copyright © 2013 Blizzard Lighting, LL C
www.blizzardlighting.com
PRODUCT LIMITED WARRANTY
Blizzard Lighting, LLC hereby w arr ants that its products shall be free of manufacturing defects in material and
workmanship for a prescribed period from the date of purchase (see specific w arrant y period below). This
warr anty shall be v alid only if the product is purchased within the United States of America, including posses-
sions and territories. This w arrant y shall be valid only if the product is purchased from an authoriz ed dealer
appointed by Blizzard Lighting, LL C. It is the owner’s responsibility to establish the date and place of purchase
by a cceptable evidence.
For warr anty service you must obtain a Return Authorization number (RA #) before sending back the product.
Contact Blizzard Lighting, LLC’ s Service D epartment at [email protected]. Send the product only to
the Blizzard Lighting, LLC f actory. A ll shipping cha rges must be prepaid. If the requested repairs or service (in -
cluding parts replacement) are within the terms of this warr anty, B lizzard Lighting, LL C will pa y return shipping
charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped
in its original package. No accessories should be shipped with the product. If an y accessories are shipped with
the product, Blizzard Lighting, LLC shall ha ve no liability whatsoever for loss of or damage to an y such acces -
sories, nor f or the safe return thereof.
This warr anty is v oid if the serial number has been altered or remo ved; if the product is modified in an y man-
ner which B lizzard Lighting, LLC concludes, after inspection, af fects the reliability of the product; if the product
has been repaired or serviced by a nyone other than the Blizzard Lighting, LLC factory unless prior written au -
thorization w as issued to purchaser by Blizza rd Lighting, LL C; if the product is damaged because not properly
maintained as set forth in the instruction manual.
This is not a service contr act, and this warr ant y does not include maintenance, cleaning or periodic check -up.
During the period specified above, Blizzard Lighting, LL C will repla ce defective parts at its expense with new
or refurbished parts, and will absorb all expenses for w arrant y service and repa ir labor by reason of def ects in
material or workmanship. The sole responsibilit y of Blizza rd Lighting, LL C under this w arrant y shall be limited
to the repair of the product, or replacement thereof , including pa rts, at the sole discretion of B lizzard Lighting.
Blizzard Lighting, LLC reserves the right to make changes in design and/or improvements upon its products
without any obligation to include these changes in an y products theretofore manufactured.
No w arrant y, whether expressed or implied, is giv en or made with respect to any accessory supplied with
products described above. Ex cept to the extent prohibited by applicable la w, all implied warr anties made b y
Blizzard Lighting, LLC in connection with this product, including warr anties of merchanta bility or fitness, are
limited in duration to the w arrant y period set f orth abo ve. And no warr anties, whether expressed or implied,
including warr anties of merchantability or fitness, shall apply to this product after said period has expired. The
consumer’s and/or Dealer ’s sole remedy shall be such repair or replacement as is expressly pro vided abo ve;
and under no circumstances shall Blizzard Lighting, LL C be liable for an y loss or damage, direct or consequen -
tial, arising out of the use of , or inability to use, this product.
This warr anty is the only written w arrant y applicable to B lizzard Lighting Products and supersedes all prior war -
ranties and written descriptions of warr anty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS:
All LED Products: 2 years (do es not include damage t o LEDs caused by mishandling)
All Controller Products: 2 years
All Fog/Atmospheric Pro ducts (Non-DMX): 90 days, (DMX): 2 years
Lasers: 2 years
Other Products no t listed here: 90 days
REGISTER YOUR PRODUCT ONLINE AT:
BLIZZARDLIGHTING.COM
GETTING STARTED
What’s In The Box?
• 1 x WallFlower™ LED Effect
• 2x 3M Brand Mounting Squares
• This Lovely User Manual
Main Features:
• Easy to use, plug and play
• Sound active w/built-in microphone
• Power output: 8W, 48x 5mm R/G/B LED’s
• Long life: 20,000+ hours
• Working environment temperature: 32°-104° F
• Operation modes: auto + sound active modes
• Input voltage: 90V-240V AC 50-60Hz
Congratulations on your purchase of the WallFlower™ LED effect! It’s an easy to use,
beautiful LED effect that features auto and sound active modes. So, now that you’ve got
your WallFlower™ (or hopefully, WallFlowers!), you should carefully unpack it and make
sure it is in good condition. If anything looks as if it has been damaged in transit, notify
the shipper immediately and keep the packing material for inspection. Again, please
save the carton and all packing materials. If a fixture must be returned to the factory, it
is important that the fixture be returned in the original factory box and packing.
SAFETY INSTRUCTIONS
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
• Maximum ambient temperature is 104°F (40°C). Do not operate fixture at higher
temperatures.
• Never try to repair the unit by yourself. Repairs carried out by unskilled people can
lead to damage or malfunction.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
CAUTION! There are no user serviceable parts inside the unit. Do not open the housing
or attempt any repairs yourself.
If something is wrong, just give us a call or send an email.
We’ll be happy to help, honest.
[email protected] - www.blizzardlighting.com
866.493.6025 | 414.395.8365 | FAX: 866.870.0031
WallFlower
TM
USAGE INSTRUCTIONS
Powering It Up!
The WallFlower is a great little plug and play effect light fitted with 48x 5mm R/G/B
LED’s, and only uses a tiny 8-watts of power while giving off an impressive color chasing
display in multiple patterns. Just plug it in and watch it go!
OPERATING MODES
Auto and Sound Active Modes
In auto mode, the WallFlower™ will automatically run through all of its various built-in
programs. In sound active mode, it will use its built-in microphone to switch programs
to the beat of music. To switch between auto and sound active modes, you will need to
insert a non-metallic object, such as wood or plastic, into the hole found on the top
of the unit to push the mode switch button found within:
Mounting
Holes
AC Power
Cord
Mode Switch Button
WARNING - Do not use any type of
electrically conductive metallic object to
push the mode switch button. It is possible
that you may accidentally short out or
damage internal components. Use a non-
metallic object such as wood or plastic!
Mounting:
On the back side, the WallFlower™
has two mounting holes that are
designed to slide and lock onto the
head of a standard flat-head screw.
And for your convenience, 2x double
sided mounting tape squares are
also included.
Tuck the power cord into the slot on
the back of the unit before mounting
the fixture onto a flat surface/wall.