Blizzard Lighting Komply Ribbon Flex User Manual

Komply™ ribbon flex, Step 3: secure the end cap

Advertising
background image

Komply™ Ribbon Flex

How to Cut Komply™ LED Ribbon Flex Strips

Step 1: Select the Cut Point

Step 2: Ribbon Connector

If you don’t need a ribbon connector, skip to step 3.

Step 3: Secure the End Cap

The final step is to simply glue the end cap back on to the end of the strip.

OK

OK

OK

OK

OK

WWW.BLIZZARDLIGHTING.COM

After the strip is cut, carefully cut and clear

here to assure that there is enough space for

soldering ribbon connector wires.

Insert the connector wires through the end cap,

and solder the wires to the pads.

Do not cut here!

Do not cut here!

Advertising