BLUESHAPE CYKLOPS - Manual

CYKLOPS LED Light
Instruction Manual
Rev 1.1
www.blueshape.net
Page 1 of 2
Introduction
BLUESHAPE CYKLOPS is an LED camera light. It features an innovative single high power LED, dimmable and capable of producing up
to 300 Lux. It has a wide operating voltage range from 9 to 30V making it suitable for a wide range of broadcast camcorders. It has 2
illumination settings @ 300Lux and 200Lux. The native light emitted is at 5600K but can also be converted to 3200K or 6800K using the
on-board dichroic filters. It features a double jointed, standing bracket for optimal orientation.
Package contents
•
CYKLOPS LED light with integrated barn doors
•
Dichroic 'white' filter (6800K)
•
Dichroic 'yellow' filter (3200K)
•
Instruction manual
Caution
1. Pointing unfiltered light directly towards the eye of the subject can be harmful and irritating and needs to be avoided.
2. Servicing of this unit is to be done only by qualified personnel or preferably by your BLUESHAPE servicing facility.
3. After prolonged use or in hot climates, the exterior of the unit may become warm or relatively hot.
Specifications:
Lamp type: Single LED module
Colour temperature: 6800K , 5600K and 3200K
Light beam: 300 Lux - 200 Lux (at 1metre)
Intensity control: change over switch
Illumination angle: 60
o
Voltage operating range: 9V to 30V
Power consumption: 4W - 6W
Power connector: D-Tap
Mount type: Hot shoe or thumb screw (optional)
Weight: 540g including barn doors and filters
Fig 1: CYKLOPS LED light - front view with open
barn doors Fig 2: CYKLOPS LED light - front view with closed
barn doors Fig 3: CYKLOPS LED light - back view.