Boomba Racing R18 Honda Civic 2006-2011 Torque Dampers - Manual

CIVIC SI 12+ MOTOR MOUNTS
INSTALLATION MANUAL
MATERIALS REQUIRED
None
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 When lifting the car
always use stands to
secure the car. 2 Remove top mount bolts. 3 Remove the top mount. 4 Remove rear mount bolts.
5 Push the engine toward the front of the
car and slide the rear mount down and
out. 6 Get the Boomba Motor Mounts ready. 7 Insert the rear mount. 8 Line up mounting holes and insert
mounting bolts.
Do not tighten bolts yet.
9 Insert the top mount.
Line up and insert the rear bolt.
10
Line up and insert front bolts.
Tighten all top mounting bolts.
11
Tighten all bottom mounting bolts.
TOOLS REQUIRED
Set of car stands
M17 socket wrench
M19 socket wrench
M17 box wrench