Boomba Racing WRX Subaru Impreza Fuel Rail - Manual

WRX - FUEL RAIL
INSTALLATION MANUAL
MATERIALS REQUIRED
8mm fuel hose 10 ft
4mm vacuum hose 3 ft
6mm vacuum hose 3 ft
6mm vacuum connector 5/16” hose clamps 8 pcs
Wire ties
3 Remove the air filter box. 4 Remove the battery.
5 Remove the intercooler’s mounting
screws. 6 Remove the right crank vent hose.
Remove BOV vacuum hose. 7 Remove the left crank vent hose. 8 Loosen up the hose clamps on the throttle
body’s adaptor hose.
9 Loosen up hose clamp on the turbo output
hose.
10
Lift the intercooler slightly.
11
Disconnect BOV return hose.
12
Remove the intercooler by lifting it up and
twisting it slightly to the left.
TOOLS REQUIRED
M8 socket wrench
M10 socket wrench
M12 socket wrench
Flat screw driver Phillips screw driver
Pliers
6mm allen wrench
Hack saw
2 Remove the air sensor. 1 Remove the air inlet.