Brandmotion CTAA585 - Manual

Removal
1. Remove the wire cover (if equipped).
2. Unplug the connector (if equipped).
3. Remove the compass (if equipped).
4. Refer to figure 1 and 2 to determine
which type of mirror mount is on the
vehicle.
5. Insert the mirror removal tool between
the mirror mount and windshield bracket,
from the top or bottom depending on
the type of mirror mount.
6. Pry the mirror mount from the windshield
bracket by pulling the tool away from the
windshield.
Ford Windshield Mirror Removal Tool
Installation
1. Slide the mirror mount over the
windshield bracket from the top, and roll
the mirror to the up position.
2. Quickly press the mirror assembly
downward along the windshield until the
mirror mount is seated on the windshield
bracket. See Figure 3. (Depending on the
type of mirror mount, you may hear a
“click” as the mount is seated into place
on the windshield bracket.)
3. Reinstall the compass, electrical
connector, and cover (if equipped).
Rev: 9/27/12
Figure 1
Figure 2
Figure 3
CAUTION: To prevent personal injury, wear ANSI-compliant eye
protection and gloves when using this tool.