Brandmotion 2000-3811 - Manual

INSTALLATION
INSTRUCTIONS
2000-3811 Instructions 8-1-13.Doc Page 1 of 54
Bongiovi Acoustics DPS – Toyota & Scion Vehicles
(Kit part number 2000-3811)
Applications Covered:
2012 – Current Scion FR-S
2011 – Current Scion iQ
2011 – Current Scion tC
2011 – Current Scion xB
2011 – Current Scion xD
2010 – Current Toyota 4-Runner
2010 – Current Toyota Avalon
2010 – Current Toyota Camry
2010 – Current Toyota Corolla
2010 – Current Toyota FJ 2010 – Current Toyota Highlander
2010 – Current Toyota Matrix
2010 – Current Toyota Prius
2010 – Current Toyota RAV4
2010 – Current Toyota Sequoia
2010 – Current Toyota Sienna
2010 – Current Toyota Tacoma
2010 – Current Toyota Tundra
2010 – Current Toyota Venza
2010 – Current Toyota Yaris
Kit Contents:
1 bubble bag containing:
DPS Module
DPS badge (attached to DPS Module)
1 bag containing:
DPS Wire Harness
1 bag containing:
These instructions
4 - 8.5” Wire Ties
2 - 24” Wire Ties
Tools Required:
(Varies with vehicle)
Side Cutters
Flat Blade Screwdriver
Phillips Screwdriver
Plastic Trim Removal Tool
10mm, 12mm, & 14mm Sockets
10mm Open End Wrench
Torque Wrench
Utility Knife
3
IMPORTANT: DPS is NOT compatible with factory
JBL and BeSpoke® audio systems. Additionally,
DPS may not be compatible with some other
factory audio options. See model specific
installation instructions for more information.