Brinno BCS 24-70 - Manual

a. Rotate lens upwards, then place the IR filter horizontally. b. Screw in IR filter
with fingers. c. Insert the screwdriver* from TLC200 Pro into one of the driving
holes, turn clockwise until tight.
* For more information, please refer to the TLC200 Pro manual page 5(Package Content).
a. Turn TLC200 Pro face down to the floor to protect against dust getting on
the sensor. b. Rotate counter-clockwise to unlock the BCS 019.
Store with the
lens covers to
protect the lens.
Glass
Driving Holes
IR Filter
Top cover
Bottom cover
Aperture
Focus
Zoom
BCS 24-70
User Manual
24-70mm F1.4
Brinno Lens
1. Package contents
Brinno Lens 24-70 mm F1.4 (BCS 24-70) x 1
Lens Bag x 1
IR Filter x 1
IR Filter case x 1
User manual x 1
2. Parts of device
Brinno Lens
3. Installation
3-2 To install IR Filter on TLC200 Pro
3-1 To remove the current lens kit(BCS 019) from TLC200 Pro
IR Filter works with BCS 019, BCS 18-55 and BCS 24-70. It’s recommended to
keep IR Filter on TLC200 Pro.
a.
a. b.
b. c.
5