Transport, such as when moving out – Bosch maxx 800 Series User Manual

Page 11

Advertising
background image

11

q Turning the foot out (clockwise)

will raise the corner of the

washer, turning the foot in

(counter-clockwise) will lower

the corner of the washer.

When the corner of the washer

is satisfactorily raised or

lowered, lock the

height-adjustable feet in place

by turning the lock nut

counter-clockwise until it locks

tightly against the washer

housing.

i

It may be necessary to hold
the washer foot with a pair

of pliers to keep it from

turning while tightening the

lock nut. It the foot does

turn, it will change the

height of the corner.

q After making preliminary

adjustments, press down on

each corner of the washer to

make sure the unit does not

wobble. If it does wobble,

lower the foot on that corner

until the foot touches the floor

firmly.

4.

Re-check the leveling status of the

appliance.

5.

Fine tune the leveling of your

washer by checking with a bubble

level after running your first load of

laundry. This is a very important

step.

Transport, such as when

moving out

Before transporting the washing

machine:
-

Turn off the water.

-

Disconnect the washing machine

from the power outlet.

-

Dismantle the supply and drainage

hoses.

-

Install the transport bolts.

Preparing and inserting the
transport bolts

q

Remove the covers.

q

Prepare the transport bolts:

Loosen the screw in the sleeve

until the end of the screw is level

with the end of the sleeve.

q

Insert and tighten all transport

bolts. Make sure that the tab on

the transportation bolt is inserted

in the slot on the washing machine

back panel.

Advertising