ClearCube ClientCube 2 Mounting Bracket - Manual (Page 3)

Page 3 of 6 P/N G0200165 Rev B, 1.1.08.15.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Before You Begin
Safety and
precautions If any zero clients in a ClientCube 2 contain a smart card reader:
Prevent ESD (electrostatic discharge) damage to smart card readers by always
discharging your body and smart card before using a reader (for example, by
touching a grounded, unpainted, metal object). ESD can vary depending on many
environmental conditions, including clothing that users wear and how they handle smart
cards. ESD damage can potentially cause unsupported card reader behavior including
failure. Always perform ESD prevention steps before using the card reader.
Tools The list below shows tools needed for installation.

Phillips head screwdriver

Drill and
32
3 -inch bit (for drilling pilot holes)