Cozzia EC366 - Manual

2
5
6
7
8
9
23
22
21 10
11 20
19 12
13 18
17
16 15
14
Table of Contents
Thank you for purchasing the EC-366 Spa Massage Chair.
Before using your massage chair, please read the contents of this instruction
manual and refer to it when needed.
Spa Features ........................................................ 2
Safety Precautions .............................................. 3-4
Chair Components .............................................. 5-6
Chair Installation & Moving .................................. 7-12
Chair Specifications ............................................. 13
Operation Guide ................................................... 14-22
Troubleshooting & Product Maintenance ............. 23
Warnings .............................................................. 24
COZZIA Consumer Warranty ............................... 25-27
Warranty Card (Attachment)
Spa Features
01
Spa massage includes: Shiatsu (acupressure), kneading, rolling, clapping, tapping,
stretch, swedish, heating, vibration, dual-action and tri-action techniques.
● An exclusive SPA massage treatment imitated through combined massage
functions.
● Wonderful stretching adjustment in calves.
● Innovative auto scanning technology in backrest automatically or manually
customizes a personal massage specifically for each user.
● Invigorating air pressure system in back, seat, armrest and footrest.
● Heated backrest in lower lumbar area.
● Six pre-programmed massage sessions with customizable strength, speed
and intensity.
● Ability to customize massage by controlling speed, adjusting rollers and
choosing partial massage areas.
● Three partial massage options in upper, middle and lower back.
● Narrow or wide back massage adjustment.
● Extended footrest automatically adjusts to fit user’s height.
● Automatic angle adjustment in back and footrest.
● Programmable timer with 5-30 minutes automatic shut-off and pause mode.
● User-friendly LCD remote control with graphic interface.
● Ergonomically designed for optimum comfort.
EC-366 Spa Massage Chair
The Spa Massage Chair is controlled by a microcomputer that performs a variety of
intelligent massage techniques and combinations that are designed to soothe sore
muscles, alleviate stress and fatigue, increase metabolism and energy, and improve
blood circulation.
03
Chair Components
04
Remote Controller
Pillow Pad
Spare Pad
Backrest
Arm Massage
Socket Point
Wheel
Seat Pad
Footrest
Legrest
Calves Rest
Armrest
Controller Stand
MASSAGING POSITION
Chair Installation
Step 1:
When setting up the chair, make sure there is at least three feet of space behind
the backrest and three feet of space in front of the footrest.
A
C
D
B
PIC 1
A
C
B
PIC 2
PIC 3
PIC 4
Attach the connecting rod and the U stay fork of the reclining actuator with a flat
head rivet, and secure with a split pin as demonstrated in PIC 1 and PIC 2.
A. Connecting rod (on the backrest)
B. U stay fork of reclining actuator (on the seat)
C. Flat head rivet
D. Split pin
Step 3:
Insert the wire plugs into the seat as demonstrated in PIC 3.
Note: Insert black to black and gray to gray, otherwise damage to the chair may
result.
Step 4:
Unfold the backrest until you hear a “click” sound.
Moving the chair
1. Restore the footrest to its original position.
2. Recline the chair to tilt approximate 45 degrees. Move the chair using the
wheels as the fulcrum.
Note:
1. Always return the footrest to its original length and restore it to its original position
before moving the chair. Otherwise,injury during movement may result.
2. Do not move the chair while a person is seated on it.
3. Place a mat on the floor and gently roll the chair over it to avoid damaging the floor.
Chair Specifications
05
Description Specifications
Operation Guide
06
Model No.
Rated Voltage
Rated Frequency
Rated Power Consumption
Timer
Max Time Rate
EC-366
110V ~
60Hz
280W Max
5, 10, 15, 20, 25, 30 minutes
60 minutes
Shipping dimensions (Seat):
48" x 30" x 29"
Shipping dimensions (Backrest): 44” x 25.5” x 16”
Upright dimensions: 53.5" x 29" x 48"
Reclined dimensions:
72" x 29" x 26"
Seat part net weight: 160 lbs
Seat part gross weight: 201 lbs
Backrest part net weight: 51 lbs
Backrest part gross weight: 68 lbs
Controller wire: 1.3 m
Power supply wire: 2.2 m
Temperature: 10°C~40°C
Humidity: 30~85 RH
Temperature: 20°C~60°C
Humidity: 30~85 RH
Dimensions (LxWxH)
Weight
Length of Wire
Usage Condition
Storage Condition
Side panel
at least 3 ft.
at least 3 ft.
Insert the power plug into an electrical outlet.
Turn the power switch to “I” position for idle mode.
The following functions are available in idle mode: ON/OFF, Backlight, Recline, Sit Up,
Lift Leg, Recline Leg.
Massage Chair Control Buttons
1. ON/OFF
Start/Stop Control Button
Press this button and the backlight of the remote controller will blink to indicate that the
massage chair is in idle mode. Then press any function button to activate the massage
chair operations.
Press the ON/OFF button again to stop all massage functions and to return the
massage rollers to their original position. The backrest and Footrest will return to its
original position.
2/3. Recline/Sit up
Backrest and Legrest Angle Adjustment Control Button
Hold one of these buttons to adjust the backrest and the legrest to a comfortable
position.
4/5. Lift Leg/Recline Leg
Legrest Angle Adjustment Control Button
Hold one of these buttons to adjust the legrest to a comfortable position.
6. Backlight
Backlight ON/OFF Control Button
Press this button to turn on and turn off the controller backlight. The backlight
automatically turns off after two minutes.
Note: Before the Backlight function is activated, pressing any function button will also
activate the Backlight, and the backlight automatically turns off after two minutes.
7. Timer
Time Interval Control Button
When a massage function is activated the time is automatically set for 15-minute.
Every time this button is pressed, the time interval will change in the following sequence:
20>25>30>5>10>15- minutes.
Note: The backlight of the remote controller will automatically light up followed by five
beeps when one minute remains on the timer.
8. Pause
Pause Control Button
Press this button to stop all massage functions and pause the chair to idle mode.
Press the pause button again to resume the original massage function.
9. Point Navi
This chair is equipped with a Point Navi function that the massage rollers can be
adjusted according to the user’s preference for a more effective massage during auto
programs. Combined with these Upward and Downward manual control buttons, it can
help provide more precise massages at precise points for more effective and in-depth
massages.
Every time this button is pressed, the massage rollers will stop at the pre-programmed
position and the machine will beep. This position can be changed within the machine
beeps 5 times. Once the machine beeps 8 times, it means that the highest massage
position for the auto programs will be the pre-programmed position.
10/11. ▲/▼
Manual Backrest UP/Down Control Buttons
For more comprehensive and comfortable massage, the user can further adjust the
height of the massage by pressing this button within 5 seconds after the beeps. The
Massage Rollers will go upwards or downwards according to your request until the most
suitable position is reached. This adjustment request is set when you let go of the button
and the manual adjustment is achieved.
Note: All four auto programs-HEALTHCARE, RELAX, SMART, SPA are equipped with
point Navi functions. For details, please refer to “Auto Program” section.
Auto Program
After activating the auto programs, the vibration function for seat can be activated
according to individual needs.
Full Body Auto Program
Auto program includes HEALTHCARE, RELAX, SMART and SPA programs.
Press any of these buttons and the chair will automatically adjust the massage rollers to
the pre-programmed position. At the same time the user can manually adjust the
massage height to the preferred level within 5 seconds after the beeps.
12. Healthcare
Strong and powerful mechanical massage functions through tapping, kneading,
clapping, rolling, Shiatsu and combined massage programs help stimulate different
acupuncture points on the body to revitalize and alleviate tensed muscles and body
aches.
13. Relax
Soft mechanical and air squeeze massage function with lower speed and strength
modes to stimulate muscles through continuous rolling, tapping, kneading and other
massage functions to relax muscles. An ideal massage mode prior to sleep.
14. Smart
Combination of air squeeze and leg-stretching function, the calves rest of the massage
chair can be straightened and extended to stretch calves and knees, as well as lower
body muscles and nerves to improve blood circulation.
15. SPA
Through combined massage functions: vibration (Jacuzzi)-Heating (Sauna)-Air
squeeze and Mechanical massages (human massage), one can enjoy a relaxing
massage similar to an exclusive SPA massage treatment. Comfortable Vibration
function on the seat areas improves blood circulation. Also, the Heating function can
effectively soothe osteoarthritis, tiredness and joint pains.
Localized Auto Program
A precise massage on a specific part of the body.
16. Full Back
Full Back Massage Start/Stop Control Button
-Neck/Shoulder
-Back/Lumber
17. Lower Body
Lower Body Massage Start/Stop Control Button
Note: The Auto Program of Full Back can be combined with the Auto program of lower
Body for richer Full Body Auto Massage mode.
18/19. Length Adjustment Control Button for Leg-rest
These two control buttons can adjust the length of the legrest. Hold the Elongate or
Withdraw control button to adjust the legrest to a comfortable length. Hold the Elongate
or Withdraw control button again to confirm the length.
20. Length Adjustment Control Button for Footrest
This SPA chair is equipped with an Auto function to enable the length of Footrest to
be adjusted to the user’s Leg-rest length for a more effective massage. Every time
the button is pressed, the Auto function will detect the best massage length.
Spot or Localized Back Massages
21. Spot
Spot Back Massage
Press this button once to activate the massage rollers.
Press the ▲ or ▼ button to select a spot massage for any part of the back.
Press the button again to stop the spot massage function and to resume the full back
massage function.
Note: The spot massage is not operable when the rolling function is activated.
22. Partial
Partial Back Massage
Press this button once to activate the massage rollers. The massage rollers perform the
partial massage with an 8 cm(3.1”) range of movement.
Press the ▲ or ▼ button to select a partial massage for any part of the back.
Press the button again to stop the partial massage function and to resume the full back
massage function.
23/24. ▲/▼
Position Adjustment Buttons for Spot or Partial Massage
When the spot or partial massage functions are activated these buttons will move the
massage rollers.
Press and hold the ▲ or ▼ button to move the massage rollers up or down.
Release the ▲ or ▼ button when the desired position is achieved.
Setting Air Squeeze
25. AUTO
Auto Air Squeeze Control Button
Press this button once to activate the seat, back, arms, feet and calves auto air squeeze
function. Press the button again to stop the auto air squeeze function.
26. Intensity
Air Squeeze Intensity Adjustment Control Button – 4 levels of Intensity
Press this button to adjust the intensity of the air squeeze function while the air squeeze
functions are activated.
27. Arms
Arms Air Squeeze Start/Stop Control Button
Press this button once to activate the arms air squeeze function.
Press the button again to stop the arms air squeeze function.
28. Back/Seat
Back and Seat Air Squeeze Start/Stop Control Button
Press this button once to activate the back and seat air squeeze functions.
Press the button again to stop the back and seat air squeeze functions.
29. Feet
Feet Air Squeeze Start/Stop Control Button
Press this button once to activate the feet air squeeze function.
Press the button again to stop the feet air squeeze function.
30. Calves
Calves Air Squeeze Start/Stop Control Button
Press this button once to activate the calves air squeeze function.
Press the button again to stop the calves squeeze function.
Note: All Air squeeze control buttons have two mode selects. Press again if you want to
change the mode.
Manual Back Massage
31. Vibration
Vibration Function Stat/Stop Control Button
Press this button once to activate the vibration for a full back massage.
Press the button again to stop the vibration massage function.
32. Stretch
Stretch Function Start/Stop Control Button
Press this button once to activate the stretch function. The air bags of calves and legs
will inflate to stretch out and draw back (pace up and down).
Press the button again to stop the stretch function.
33. Kneading
Kneading Function Start/Stop Control Button- 2 modes (KNEADING1/ KNEADING2); 4
levels of speed
Press this button once to activate the kneading function for a full back massage at
medium intensity.
Press the button again to stop the kneading massage function.
Press the KNEADING 1 or the KNEADING 2 button to select the mode desired.
Note:
This function can be combined with Tapping, clapping and Shiatsu to enjoy
multi-massage functions.
34. Tapping
Tapping Function Start/Stop Control Button - 2 modes (TAPPING 1/ TAPPING 2); 3
levels of width (narrow, medium, wide); 4 levels of speed.
Press this button once to activate the tapping function for a full back massage at
medium intensity.
Press the button again to stop the tapping massage function.
Press the TAPPING 1 or the TAPPING 2 button to select the mode desired.
35. Clapping
Clapping Function Start/Stop Control Button -2 modes (CLAPPING 1/ CLAPPING 2);
3 levels of width (narrow, medium, wide); 4 levels of speed
Press this button once to activate clapping function for a full back massage at medium
intensity.
Press the button again to stop the clapping massage function.
Press the CLAPPING 1/ CLAPPING 2 button to select the mode desired.
36. Shiatsu
Shiatsu Function Start/Stop Control Button-2 modes (SHIATSU 1/ SHIATSU 2) ; 3 levels
of width (narrow, medium, wide); 4 levels of speed
Press this button once to activate the Shiatsu function for a full back massage at
medium intensity.
Press the button again to stop the Shiatsu massage function.
Press the SHIATSU 1 or the SHIATSU 2 button to select the mode desired.
37. Rolling
Rolling Function Start/Stop Control Button-3 levels of width (narrow, medium, wide)
Press this button once to activate the rolling function for a full back massage.
Press the button again to stop the rolling massage function.
Note: Tapping, clapping, Shiatsu, Swedish and spot functions cannot be combined with
the rolling function.
38. Strength
Kneading Speed Adjustment Control Button
Press this button to adjust the speed when the kneading function is activated.
39. Speed
Speed Adjustment Control Button
Press this button to adjust the speed when the tapping, clapping and Shiatsu functions
are activated.
40. Width
Width Adjustment Control Button
Press this button to adjust the width when the tapping, clapping, Shiatsu and rolling
functions are activated.
Waist Heating Function
41. Heating
Heating Function Start/Stop Control Button
Press this button once to activate the heating function for the waist.
Press the button again to stop the heating function.
Setting Seat Vibration
42. Vibration
Vibration Function Start/Stop Control Button-2 modes (SEAT VIBRATION 1/ SEAT
VIBRATION 2) ; 4 levels of speed
Press this button once to activate the Vibration function for seat.
Press the button again to stop the vibration massage function.
Press the SEAT VIBRATION 1 or the SEAT VIBRATION 2 button to select the mode
desired.
43. Stop
Press this button to stop all massage functions. The massage rollers will resume their
original position.
Switch the power button under the chair to the “O” position and disconnect the power
cord plug from the electrical outlet.
Seat Raising Button (optional)
There is a red button on the side of the right armrest. This button only is used after the
user presses the ON/OFF button and stops the massage. Press this button and the seat
will be raised slowly to help the user stand up. Please be patient as it may take about 30
seconds. This function is built-in especially for the elderly or for those suffering from
osteoarthritis. After the seat is raised fully, it will return slowly to the original position.
Switch the power button under the chair to the “O” position and disconnect the power
cord plug from the electrical outlet.
Note: When press this button, the power
switch should be “I” position for idle mode.
1
Troubleshooting & Product Maintenance
07
This massage chair is controlled by a microcomputer and is susceptible to power
surges of +10 to -10%.
The following situations may display in the event of a power surge:
1. Make sure the chair is plugged
into a working outlet.
2. Turn the power OFF and then ON
again.
1. Check to see that the plug is well
connected and working.
2. Make sure that the massage chair
switch is turned to the “I” position.
The massage chair is connected
to the power supply but is not
functioning.
The remote control works, but the
massage chair is not functioning.
The massage chair may have
overheated due to prolonged use.
Turn off the power and allow the chair
to cool for 30-50 minutes.
Both the remote control and the
massage chair are not functioning.
Situation Solution
/
B
Instruction Manual EC-366
Step 7:
Repeat Step 5 to install left arm
massage components.
Install the remote controller stand by
tightening the screws (long ones) as
demonstrated in PIC 6.
Step 6:
Install the right arm massage cover
by tightening the screws (short ones)
as demonstrated in PIC 5, then cover
the screws with the rectangle cap.
Step 8: (Optional)
Remove the spare pad located in
backrest cover for a deeper massage.
Note: The spare pad has been
inserted into the backrest cover. If
strong massage is desired, remove
the spare pad from the cover to
strengthen the massage. If milder
massages are desired, insert the
spare pad into the cover to lessen the
strength of the massage.
Step 2:
Lift the backrest, then lower the backrest into the seat brackets, Securely lock the
flat head bolts into sides of the seat.
Note: Carefully unwrap the armrest to avoid scratching during installation.
A: Flat Head Bolt (on the backrest)
B: Holder (on the seat part)
Step 5:
Install the right arm massage
components by tightening the
screws (short ones) and insert the
air hose to the arm-rest as
demonstrated in PIC 4.
PIC 5
PIC 6
Grey Black
24
08
Warnings
PIC 2
25
09
COZZIA Consumer Warranty
COZZIA products have the following warranty: COZZIA’s massage chairs,
motion upholstery and home theater massage seating provide a one year in-home
service warranty and a two-year parts warranty. COZZIA customer service will not
issue Return Material Authorizations (RMAs) for products. COZZIA products will be
either repaired by the consumer or by an in-home technician. COZZIA will not issue
Return Material Authorizations (RMAs) for buyer’s remorse.
SERVICE AND TECHNICAL SUPPORT
Consumers may contact COZZIA’s customer service department at 1-877-977-0656
between 9:00 am and 5:00 pm PST, Monday through Friday for warranty or service
issues.
Consumers are required to provide the unit serial number and dated proof of
purchase (sales receipt) when they contact the COZZIA service department
regarding a repair.
A COZZIA customer service representative will attend to most consumer inquiries, but
in some cases a technical service specialist will provide advanced support.
Non-warranty repair is provided on a "per incident" basis. COZZIA customer service
will verify that the unit has failed and provide instructions for repairing a unit. All
appli
cable repairs, parts, shipping, handling, local tax and a "per incident" fee will be
charged for non-warranty repairs and support calls.
Proof of purchase (original receipt) is required for all warranty repairs or service.
PRODUCT REPAIRS
Many COZZIA product repairs may be performed by the consumer in their own
home with parts and instructions supplied by COZZIA such as remote controller
replacements that don’t require a technician.
26
27 4
3
● Floor Models and Demonstration Units have a prorated warranty period
that begins the day the model is placed on the floor and connected to an
electrical outlet by the retail partner. Proof of purchase is required in order
to obtain warranty service and parts. Non-warranty parts and service are
available at a “per incident” charge.
● Warranty Coverage Period - Warranty coverage starts at the time that the
consumer PURCHASES their chair. Proof of purchase is required for all
warranty repairs. The warranty time period is measured by continuous
calendar days based on a seven-day week.
● Field Service – COZZIA customer service department will diagnose and
schedule an authorized service provider to repair the chair in the
consumer's residence.
● Parts - All parts deemed necessary for repairs will be shipped to the
consumer at no charge by the COZZIA service department.
Canadian consumers may contact COZZIA's customer service department at
1-877-977-0656
between 9:00 am and 5:00 pm PST, Monday through Friday for
warranty or service issues.
CONSUMER WARRANTY LIMITATIONS AND EXCLUSIONS
● Warranties are only valid in the 48 contiguous United States and Canada
and are contingent upon the consumer operating the chair according to the
corresponding instruction manual.
● The warranty only applies to COZZIA products and does not include any
accessories or enhancements.
● Field service requires pre-approval and must be performed by COZZIA’s
authorized field service personnel. Field service is only available in the
United States and in major metropolitan areas in Canada.
● Softening of foams and filling composites in pillows, pads, and memory
foam occurs naturally and does not constitute a defect under this warranty.
● Fading, wear and piling of fabrics occurs naturally and does not constitute
a defect under this warranty.
● Natural markings, grain and dye variations in leather do not constitute a
defect under this warranty.
● Warranties do not cover any loss or damage resulting from improper
installation, unauthorized repairs or modifications, improper use of
electrical/power supply, loss of power, dropped product, a malfunction or
damage of an operating part from failure to provide manufacturer's
recommended maintenance, transportation damage, theft, abuse, misuse,
neglect, vandalism or environmental conditions (fire, floods, rust, corrosion,
sand, dirt, windstorm, hail, earthquake or exposure to weather conditions),
loss of use during the period the product is at a repair facility, or otherwise
awaiting parts or repair.
● Damage due to shipping and handling does not constitute a defect under
this warranty.
● Under no circumstance shall COZZIA or its representatives be liable for
indirect, consequential, or incidental damages (including damages for lost
profits, business interruption, bodily injury, medical and the like), even if
any party has been advised of the possibility of such damages.
● Warranties are non-transferable and shall be in lieu of any other warranty,
express or implied, including but not limited to any implied warranty or
merchantability or fitness for particular use.
● COZZIA’s sole liability and the purchaser's exclusive remedy shall be for
the repair, or at COZZIA’s option, for the replacement of the defective part.
Not withstanding the above, if replacements parts for defective materials
are not available, COZZIA reserves the right to make substitutions in lieu
of repair or replacement.
● All warranties begin on the DATE OF PURCHASE; no allowance or
extension is offered for delivery and/or installation.
● Warranties do not apply to rental, business, commercial, institutional or
other non-residential users.
Product Serial No. (located on product):
Purchase Price: Model No:
Date Purchased:
First Name: Last Name:
Address:
City: State: Zip:
Phone:
Email:
Please mail to: Cozzia USA LLC
1102 John Reed Court
City of Industry, CA, 91745
Tel: 1-877-977-0656
Fax: 1-800-521-4712
WARRANTY REGISTRATION FORM
Warranty Card
● Do not use water and other cleaning detergents on the massage chair.
● Do not stack, stab, slit or harshly pull on the surface of the massage chair.
● Gently press the buttons during operation and avoid hitting the buttons with hard objects.
● Pull out the power supply plug after each use.
● Do not use the massage chair for more than 30 minutes at a time.
● DO NOT position any body part in between the gaps of the leg rest when the automatic leg
extension feature is in operation as demonstrated PIC 1, in order to prevent pinch to you.
Note: If you are remiss to position any body part in between the gaps of the leg rest,
please press PAUSE button to stop and then get your body part out rapidly as
demonstrated PIC 2.
● DO NOT attempt to press the ON/OFF button to stop, as when we press this button,
the footrest will automatically shrink its original position and may cause much tighter
pinch.
● If you have to rise from the chair to stop accident, injury or damage to others by you
or you want to get your feet and calves out when the automatic leg extension feature is
in operation, please press PAUSE button to stop as demonstrated PIC 2, the footrest will
gradually deflate in some seconds and then quickly get your foot and calves out and rise.
Note:
This way as above mentioned just using in emergencies.
Please bear in mind that always return the footrest to its original length and restore it to
its original position, then rise from the chair in order to prevent accident, injury or damage
to yourself and chair.
PIC 1
02
When using the massage chair, basic precautions should always be followed to
reduce the risk of electric shock, burns, fire or injury to persons. Please read the
following precautions before using the massage chair.
* Make sure the power plug is securely inserted into a proper electrical outlet to
reduce the risk of short-circuit and fire.
* Always unplug the massage chair from the electrical outlet immediately after
using and before cleaning.
* DO NOT use the massage chair in areas where the humidity is high such as a
sauna or steam room.
* DO NOT use the massage chair outdoors and avoid areas with direct sunlight.
* If the electricity is off, turn the power switch to the OFF position and unplug the
massage chair from the electrical outlet to prevent any damages to the chair
when the electricity comes back on.
*
Never plug/unplug the power cord plug socket with wet hands.
* Close and continuous supervision is necessary when the massage chair is used
by, on or near children or disabled persons.
*
No more than one person should use the massage chair at a time.
* The massage chair is intended for use as described in the Instruction Manual.
Do not use any attachments other than those recommended by COZZIA.
* DO NOT attempt to stand or sit on the backrest, armrest or footrest in order to
prevent accident, injury or damage to the chair.
* Avoid falling asleep while using the massage chair.
*
Always keep the massage chair clean, and never insert any objects into or
around the gaps of the massage chair.
* DO NOT move the massage chair by pulling on the power supply cord.
* Make sure there are no children, pets or other obstacles behind or underneath
the massage chair.
* If you find any rips or tears in the fabric of the massage chair contact the COZZIA
service department and stop using the chair immediately.
* This massage chair is designed for household use and should not be used in
non-residential settings.
* Please consult your doctor if you are in doubt as to whether or not you should
use this massage chair.
* Please consult a doctor before using the massage chair if you are pregnant,
undergoing any medical treatment, using a medical electronic device such as a
pacemaker, or are experiencing any of the following: Malignant tumor, heart
disease, back pain, abnormal or curved back bone, osteoporosis or acute illness.
*
If you experience pain while using the massage chair, stop using the chair
immediately and consult your doctor.
*
Never use a massage function on swollen or inflamed parts of the body.
* DO NOT use the massage chair for more than 30 minutes at a time.
* DO NOT use the massage chair where aerosol (spray) products are being used
or where oxygen is being administered.
* This massage chair is a non-professional product designed to provide a comfortable
massage and should not be substituted for appropriate medical treatment.
*
Never operate the appliance with the air openings blocked. Keep the air openings
free of lint, hair, and the like.
* Temperatures sufficiently high to cause burns may occur regardless of the control
setting. Do not use on an invalid or on a sleeping or unconscious person. Check the
skin in contact with the heated area of the appliance frequently to reduce the risk of
blistering.
* Burns may result from improper use.
*
Do not crush-avoid sharp folds.
*
Keep children away from extended foot support (or other similar parts.)
*
DO NOT WET-DO NOT USE PINS.
*
NEVER REMOVE COVER.
Safety Precautions
Use the diagonal pliers to cut off the cable tie which binds the stopper of the
backrest, and take down the packing material of the backrest actuator.