Setting the handset volume, Choosing the handset volume (for volume amplify), Setting the handset volume 1 – Brother fax2800 User Manual
Page 54
4 - 5
I N I T I A L S E T U P
Setting the Handset Volume
1
Press Menu/Set, 1, 4, 4.
2
Press
to select
HIGH
(or
LOW
), and then press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the handset volume any time you are talking on the telephone.
There are two handset volume levels,
LOW
and
HIGH
. The default setting is
LOW
.
Press
to adjust the volume level. The LCD shows the setting you are
choosing. The new setting will remain until you change it again.
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use the machine, you must decide if you need to set the
handset volume to
VOL AMPLIFY: ON
for a user who is hearing-impaired.
The AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press Volume
on the control panel to
adjust the volume to
LOW
or
HIGH
. When the handset is replaced, the handset
volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume
on the control panel to adjust the
volume to
LOW
,
HIGH
or
AMPLIFY
. When the handset is replaced, the
handset volume returns to the default setting of
LOW
.
VOLUME AMPLIFY:ON
—
PERMANENT
Choose
VOL AMPLIFY:ON
—
PERMANENT
if all of the users are
hearing-impaired. During a conversation, users can press Volume
on the
control panel to adjust the volume to
LOW
,
HIGH
or
AMPLIFY
. When the
handset is replaced, the handset volume returns to the default setting of
AMPLIFY
.
When you press Volume
on the control panel to adjust the volume, the
LCD shows the setting you are choosing. Each key press changes the volume
to the next setting.
4 . H A N D S E T
or
or
or
or
or
or