Brother fax2800 - Manual (Page 76)

7 - 3 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Setting Up Groups for Broadcasting
Groups allow you to send the same fax message to many fax numbers. You can
store the Groups on your One Touch keys (FAX models only) or Speed dial
locations, and then broadcast by pressing only the One Touch key (FAX models
only) or Search/Speed Dial, #, the two-digit location, (FAX-2800, MFC-4800)
or three-digit location (FAX-2900, FAX-3800) and Fax Start. First, you’ll need
to store each fax number as a One Touch or Speed Dial number. Then, you can
combine them into a Group. Each Group uses up a One Touch or Speed Dial
number. You can have up to six Groups, or you can assign up to 127 numbers
(FAX-2900 and FAX-3800), 107 (FAX-2800) or 99 (MFC-4800) to one large
Group.
(See
Storing One Touch Dial Numbers (For FAX Models Only) , page 7-1, Storing
Speed Dial Numbers , page 7-2 and Broadcasting, page 7-7.)
1
For the FAX, press Menu/Set, 2, 3, 3.
For the MFC, press Menu/Set, 2, 3, 2.
2
For the MFC-4800, store the Group as a
Speed Dial number.
Press Search/Speed Dial, followed by the
two-digit location where you wish to store the
Group number, and then press Menu/Set.
(For example, press Search/Speed Dial, 07.)
—OR—
For the FAX models, store the Group as a One Touch or Speed Dial number.
For the FAX models, press a One Touch key where you wish to store the Group
number, and then press Menu/Set. (For example, press One Touch key 2.)
3
Use the dial pad to enter the Group number, and then press Menu/Set.
(For example, press 1 for Group 1.)
4
To include One Touch or Speed Dial
numbers in the Group, enter them as if
you were dialing. For example, for One Touch number 5, press One Touch key
5. For Speed Dial location 09, press the Search/Speed Dial button, then press
0, 9 on the dial pad. The LCD shows 05, #09.
5
Press Menu/Set to accept the numbers
for this Group.
6
Use the dial pad and the chart on page 4-2 to enter a name for the Group, and
then press Menu/Set. (For example, type NEW CLIENTS.)
7
Press Stop/Exit.
For FAX-2800 and FAX-3800, press the Search/Speed Dial button, and
then press the three-digit location.
You can print a list of all One Touch and Speed Dial numbers. (See Chapter 10,
Printing Reports.)
P R E S S S P E E D D I A L
O R O N E - T O U C H K E Y
For the FAX, LCD shows
P R E S S S P E E D D I A L
S P E E D - D I A L ? #
For the MFC, LCD shows
G 0 1 : * O 5 # O 9
N A M E :