Bowers & Wilkins DM2 MK2 User Manual

Dm2 mk2, Stand-mount loudspeaker system product summary, Technical highlights

Advertising
background image

DM2 Mk2

Stand-mount loudspeaker system

Product Summary

The DM2 MK2 is a three-driver loudspeaker system of 47 litres capacity. It is a free-standing

design, for use with B&W purpose-made accessories but will also incorporate well into existing

furniture.

The DM2 MK2 offers a wide horizontal dispersion and excellent vertical dispersion within a

listening window of approximately 10° in the vertical plane and 40° in the horizontal.

To take maximum advantage of this of this important design feature, the loudspeaker must be

mounted vertically and located at the correct listening height or angled slightly to project the

window in an upward direction.

The pedestal stand or angled plinth caters for these two alternatives.

Technical highlights

The bass driver is housed in a critically vented enclosure and has a crossover point of 400 Hz

where the vent tuning is so designed to extend the low frequency half point to 45Hz.

The mid band frequencies are handled by a 100mm unit housed in a separate enclosure –

critically damped with long-haired natural wool.

Frequencies above 3kHz are handled by a 25mm multi-filament weave polyester dome unit,

critically damped with PVA compounds.

B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.

www.bwspeakers.com

Drive Units

Frequency Response

High-frequency driver: a 25mm multi-

filament weave polyester dome unit,

critically damped with PVA compounds

Mid-range driver: a 100mm unit housed

in a critically vented enclosure

Bass Driver: housed in a critcally vented

enclosure

50Hz – 18kHz ± 3dB, at centre of

listening window

Sensitivity

Power Handling

Dimensions

9 volts into 8 ohms = 85dB at 1m

25W – 200W

Height: 710mm Width: 270mm

Depth: 330mm

Advertising