Brother P-TOUCH PT-2030 - Manual (Page 44)

EDITING A LABEL
38
Creating a Bar Code Label
z
Bar Code Settings
z
Entering Bar Code Data
Press the Bar Code key.
The Bar Code Input screen is displayed.
Type in the bar code data.
Special characters can be entered in the bar code
when using the CODE39, CODABAR, CODE128 or
GS1-128 (UCC/EAN-128) protocols. When not using
special characters, go to step 5.
Press the Symbol key.
A list of characters available for the current protocol is displayed.
Select a character using the or key, then press
the OK or Enter key to insert the character in the bar
code data.
Press the OK or Enter key to insert the bar code in the
label.
The bar code is displayed on the text entry screen.
Attribute Value
Protocol
CODE39, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
CODABAR
Width
Small
Large
Under#
(characters printed
below bar code)
On
Off
C.Digit
(check digit)
Off
On
(only available for the CODE39, I-2/5
and CODABAR protocols)
1
Up to five bar codes can be entered on a label.
2
3
4
5