Banner SureCross DX80 Wireless Networks - Manual

Configurable Node with switched power outputs, discrete inputs, discrete NMOS outputs, and analog inputs
IP67 Base
2.4 GHz
IP20 Base
900 MHz
For additional information, updated
documentation, and accessories,
refer to Banner Engineering's web-
site,
www.bannerengineering.com/
surecross .
The SureCross® wireless system is a radio frequency network with integrated I/O that can oper-
ate in most environments and eliminate the need for wiring runs. Wireless networks are formed
around a Gateway, which acts as the wireless network master device, and one or more Nodes.
• Wireless industrial I/O device with two discrete inputs, two discrete (NMOS sinking) outputs
when configured for discrete mode; two discrete inputs, two discrete outputs, and two analog
inputs when configured for analog mode
• FlexPower® power options allows for +10 to 30V dc, solar, and battery power sources for low
power applications.
• DIP switches for user configuration
• Multiple switched power outputs can be switch configured to provide sensor actuation voltage
from the battery supply
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple Access
(TDMA) control architecture ensure reliable data delivery within the unlicensed Industrial, Sci-
entific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and Node, including
fully acknowledged data transmission
• Lost RF links are detected and relevant outputs set to user-defined conditions
• The DX80...C models are certified for use in Class I, Division 2, Group A, B, C, D; Zone 2
(Category 3G) Hazardous Locations when properly installed in accordance with the National
Electrical Code, the Canadian Electrical Code, or applicable local codes/regulations (see
Specifications)
Models (0-20 mA Analog
Inputs) Frequency Environmental Rat-
ing Inputs and Outputs
DX80N9X2S2N2M2
900 MHz ISM
Band
IP67, NEMA 6
Discrete Mode
Inputs: Two selectable discrete
Outputs: Two NMOS discrete
Switch Power: Two, Configurable
Analog Mode
Inputs: Two selectable discrete, two 0
to 20 mA analog
Outputs: Two NMOS discrete
Switch Power: One, Configurable
DX80N2X2S2N2M2
2.4 GHz ISM
Band
DX80N9X2S2N2M2C
900 MHz ISM
Band
IP20, NEMA 1
DX80N2X2S2N2M2C
2.4 GHz ISM
Band
Models (0-10V Analog
Inputs) Frequency Environmental Rat-
ing Inputs and Outputs
DX80N9X2S2N2V2
900 MHz ISM
Band
IP67, NEMA 6
Discrete Mode
Inputs: Two selectable discrete
Outputs: Two NMOS discrete
Switch Power: Two, Configurable
Analog Mode
Inputs: Two selectable discrete, two 0
to 10V analog
Outputs: Two NMOS discrete
Switch Power: One, Configurable
DX80N2X2S2N2V2
2.4 GHz ISM
Band
DX80N9X2S2N2V2C
900 MHz ISM
Band
IP20, NEMA 1
DX80N2X2S2N2V2C
2.4 GHz ISM
Band
Internal antenna models are also available. For more information, contact your local Banner Engineering Corp. representative.
SureCross DX80 FlexPower Node
P/N 131296 Rev. L 5/21/2013
0 131296 6