Banner SI-HG63 Hinge Style Switches User Manual

Hinge wing safety interlock switches, Models

Advertising
background image

Datasheet

SI-HG(Z)63 Series Safety Interlock Switches attached with a load-bearing hinge

• Safety switch is integrated into a highly robust PBT housing and screwed onto the fine-cast stain-

less steel or zinc die-cast hinge

• Safety switching point is repositionable
• Right-hinge QD, left-hinge QD, and right-angle QD hinge models available; switches can also be

converted to operate from the opposite side

• A non-switching blank hinge is also available. See

Blank Hinge

on page 13.

• Switch components are protected from mechanical impact for superior performance to actuator-

activated safety switches; rated IEC IP67

• Hinge operates to a full 270° range of motion; safety switching point (guard-closed position) is

adjustable over the full 0 to 270°operating range

• Stainless steel hinge supports a load of 1800 N (180 Kg ). Zinc die-cast hinge supports a load of

1200 N (120 Kg)

• When properly interfaced or used with an appropriate controller, two SI-HG(Z)63 switches on an

individual gate or guard can achieve safety category 4, per ISO 13849-1 (EN 954-1)

• Typical applications include hinged covers and guards on machines and hinged gates in safety

fencing systems

Models

Model

Construction

Housing Style/QD Connection

SI-HG63FQDR

Stainless Steel

Inline QD—With QD facing down, switch is mounted on right side of hinge

SI-HGZ63FQDR

Zinc Die-cast

SI-HG63FQDL

Stainless Steel

Inline QD—With QD facing down, switch is mounted on left side of hinge

SI-HGZ63FQDL

Zinc Die-cast

SI-HG63FQDRR

Stainless Steel

Right-Angle QD—With switch body down, switch is mounted on right side of hinge

SI-HGZ63FQDRR

Zinc Die-cast

33

21

11

rd/bu

gn

rd

34

22

12

rd/bk

rd/ye

rd/wh

Figure 1. Contact Configuration

1

(Gate Closed State)

rd/bu

rd

rd/bk

rd/ye

rd/wh

33

21

11

gn

34

22

12

Figure 2. Contact Configuration

1

(Gate Open State)

1.5 Nm

Set Point

1.5 Nm

11-12

21-22

33-34

Safety

Safety

Non-Safety

Contacts:

Open

Closed

Transition

Figure 3. Switching Diagram

1

Terminals 33 and 34 are non-safety.

Hinge Wing Safety Interlock Switches

Datasheet
129465_web Rev.
D

3/4/2014

Advertising
This manual is related to the following products: