Banner MINI-BEAM Expert Series User Manual

Mini-beam expert series installation guide

Advertising
background image

Microprocessor-based TEACH mode photoelectric sensors¹

Additional information on this product is immediately available online at

www.bannerengineering.com/

55214

View or download additional information, including excess gain curves, beam patterns and accessories.
For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888)
373-6767.

WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel
protection. Doing so could lead to serious injury or death.
This device does NOT include the self-checking redundant cir-
cuitry necessary to allow its use in personnel safety applica-
tions. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.

¹ U.S. patent(s) issued or pending

Retroreflective Models

Sensing Mode

Model *

Range or Focus

Supply Voltage

Output Type

Retroreflective, 650 nm visible red

SME312LV

5 m (15 ft)**

10 to 30V dc

Bipolar NPN/PNP

Polarized retroreflective, 650 nm visible red

SME312LP

10 mm to 3 m** (0.4 in to 10 ft)

Polarized retroreflective, 650 nm visible red (clear object)

SME312LPC

1 m (3.3 ft) with supplied reflector**

** Sensing ranges vary according to the efficiency and reflective area of the retroreflector(s) used. (Retroreflective tape is not recommended for use with Clear Object
Detection models.) See Accessories and the Banner Engineering catalog for more information.

Diffuse Models

Sensing Mode

Model *

Range or Focus

Supply Voltage

Output Type

Diffuse, 880 nm infrared

SME312D

380 mm (15 in)

10 to 30V dc

Bipolar NPN/PNP

Diffuse, 650 nm visible red

SME312DV

1100 mm (43 in)

Divergent Diffuse, 880 nm infrared

SME312W

130 mm (5 in)

Convergent Models

Sensing Mode

Model *

Range or Focus

Supply Voltage

Output Type

Convergent, 650 nm visible red

SME312CV

16 mm (0.65 in)
Spot Size at Focus: 1.3 mm (0.05 in)

10 to 30V dc

Bipolar NPN/PNP

SME312CV2

43 mm (1.7 in)
Spot Size at Focus: 3.0 mm (0.12 in)

Convergent, 525 nm visible green

SME312CVG

16 mm (0.65 in)
Spot Size at Focus: 1.0 mm (0.04 in)

Convergent, 475 nm visible blue

SME312CVB

16 mm (0.65 in)
Spot Size at Focus: 1.8 mm (0.07 in)

Convergent, 450-650 nm visible white

SME312CVW

MINI-BEAM Expert Series Installation Guide

P/N 068812 Rev. B

1/23/2013

0 068812

5

Advertising
This manual is related to the following products: