Banner SM30 High-Power Series - Manual

SM30 Series 30 mm Barrel Sensor
Opposed-Mode Infrared Photoelectric Sensors for Especially Demanding Applications
Printed in USA Apr 2013 P/N 03541 Rev. E
• Stainless steel or plastic barrel models
• Very high excess gain; 150 m (500 ft) sensing range; 880 nm Infrared LED
• Positive sealing eliminates even capillary leakage; lens is quad-ring sealed; exceeds
NEMA 6P (IP67) ratings – ideal for equipment wash-down environments
• EZ-BEAM ® technology provides reliable sensing without the need for adjustment
• Modulation frequency “A” is standard; frequencies “B” and “C” also available for
preventing crosstalk in multiple-sensor applications (emitter and opposed receiver
frequencies must match)
• AC- and DC-operated receiver models available; emitters feature Universal voltage
• Range for all models:
150 m (500 ft). See page 3 for performance curves.
* Any emitter and receiver shown here can be used together, if they have the same modulation frequency.
** Standard 2 m (6.5 ft) cable and integral QD models are listed. A model with a QD connector requires a mating cable; see page 4. To order the 9 m (30 ft) cable: add
suffix “W/30” following the Frequency suffix of any cable model (e.g., SM30PRLBW/30).
† AC models with QD require SM30CC model cables; see page 4.
Modulation Frequency*
Housing Cable**
Supply
Power
Output Type
A B C
Emitter Models
SMA30PEL SMA30PELB SMA30PELC
Plastic
2 m (6.5') 2-wire Cable
Universal:
12 to 240V ac,
10 to 30V dc
–
SMA30PELQD SMA30PELQDB SMA30PELQDC 3-pin Mini-style QD
†
SMA30SEL SMA30SELB SMA30SELC Stainless
Steel
2 m (6.5') 3-wire Cable
SMA30SELQD SMA30SELQDB SMA30SELQDC 3-pin Mini-style QD
†
DC Receivers
SM30PRL SM30PRLB SM30PRLC
Plastic
2 m (6.5') 4-wire Cable
10 to 30V dc
Bi-Modal™
NPN or PNP
SM30PRLQD SM30PRLQDB SM30PRLQDC 4-pin Mini-style QD
SM30SRL SM30SRLB SM30SRLC Stainless
Steel
2 m (6.5') 4-wire Cable
SM30SRLQD SM30SRLQDB SM30SRLQDC 4-pin Mini-style QD
AC Receivers
SM2A30PRL SM2A30PRLB SM2A30PRLC
Plastic
2 m (6.5') 2-wire Cable
24 to 240V ac
SPST
Solid-state,
L.O.
SM2A30PRLQD SM2A30PRLQDB SM2A30PRLQDC 3-pin Mini-style QD
†
SM2A30SRL SM2A30SRLB SM2A30SRLC
Stainless
Steel
2 m (6.5') 3-wire Cable
SM2A30SRLQD SM2A30SRLQDB SM2A30SRLQDC 3-pin Mini-style QD
†
SM2A30PRLNC SM2A30PRLNCB SM2A30PRLNCC
Plastic
2 m (6.5') 2-wire Cable
SPST
Solid-state,
D.O.
SM2A30PRLNCQD SM2A30PRLNCQDB SM2A30PRLNCQDC 3-pin Mini-style QD
†
SM2A30SRLNC SM2A30SRLNCB SM2A30SRLNCC
Stainless
Steel
2 m (6.5') 3-wire Cable
SM2A30SRLNCQD SM2A30SRLNCQDB SM2A30SRLNCQDC 3-pin Mini-style QD †
WARNING . . . Not To Be Used for Personnel Protection
Never use these products for personnel protection. Doing so could lead to serious injury or death. These devices do NOT include the self-checking redundant circuitry
necessary to allow their use in personnel safety applications. A device failure or malfunction can cause either an energized or de-energized output condition. Consult your
current Banner Safety Products catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.