Hinkley Lighting QUICK CONNECT 1507QC - Manual

3/4" Long Philips
Wir
e f
rom
Fix
tur
e
Head Screw
(wire barbs inside)
wire
from
Tran
sform
er
Connector Top
Connector Bottom
6). Replace screw to secure quick connector assembly.
making electrical contact.
5). Place top over bottom and press downward.
"Two Wire"
The internal barbs will pierce both wires insulation
.
4). Place wire from fixture into the smaller area.
1). Remove screw with Philips Head screw driver.
2). Seperate the two parts of the connector body.
3). Place pass through wire from transformer into
large area labeled
The 1507QC is for use with SPT type
wire only. This connector is not for use
with the following models:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HINKLEY LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OFHINKLEY LIGHTING IS PROHIBITED.
1507QC Quick Connect
2"
1"
3/4"
Top of Connector has
internal barbs that cut
into wire insulation