Watts PWBWGAC 3-4 Cu. Ft. User Manual

Pure water, Series pwbwgac, Whole house carbon system

Advertising
background image

For Residential and Light Commercial Applications

ES-WQ-PWBWGAC

Job Name –––––––––––––––––––––––––––––––––––––––––––

Contractor ––––––––––––––––––––––––––––––––––––––––––––

Job Location –––––––––––––––––––––––––––––––––––––––––

Approval –––––––––––––––––––––––––––––––––––––––––––––

Engineer –––––––––––––––––––––––––––––––––––––––––––––

Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––

Approval –––––––––––––––––––––––––––––––––––––––––––––

Representative ––––––––––––––––––––––––––––––––––––––––

PWBWGAC

Whole House Carbon System

Connection Size: 1" (25mm)

Flow Rate: up to 15 gpm (56 lpm)

Watts Whole House filters for chlorine taste, odor, and sedi-

ment removal.
Our PWBWGAC Series activated carbon filters are designed for

residential and light commercial applications up to 15 gallons

per minute. Watts activated carbon filters are highly popular

because they correct a wide range of water quality issues

by removing chlorine, taste, odors, organic chemicals, and

sediment.
Activated carbon has been used in the treatment of drinking

water for over 2000 years. It was found that charred wood

products aided in improving the quality of drinking water.

Media

We use Aquasorb

®

coconut shell activated carbon. This is a

high-activity granular activated carbon manufactured by steam

activation of select coconut shell charcoal. Its high micro-

porosity makes it particularly well suited for the adsorption of

low molecular weight compounds at very low concentrations.

It is also ideally suited for the removal of oxidizing agents such

as chlorine from drinking water. Another important feature of

this activated carbon is its superior mechanical hardness which

helps ensure a clean, low dust product with an exceptionally

long life span.

Pro SE Series Control Valve

Manufactured from high-tech materials, the Pro SE Series

control valve has been engineered and tested to withstand

the equivalent of 27 years of uninterrupted daily use. The pro-

prietary design features a Teflon

®

coated piston that glides

through a series of seals and spacers. This seal/spacer and

piston configuration is the most reliable design in control valve

technology. The valve features an electronic control for easy

programming.

Filter Tank

Features a non-corrosive fiberglass tank with a thermoplastic

inner liner. The tanks are NSF/ANSI Standard 44 or 61 certified.

PURE WATER

Series PWBWGAC

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Benefits

Great tasting water from every tap in your house!
No bad tastes!
No foul odors!
Crystal clear water for drinking, bathing, and cooking!
User-friendly equipment.
Low maintenance due to automatic operation.

System Specifications

Minimum inlet pressure: 30 psig
Maximum operating pressure: 125 psig
Minimum water temperature: 34°F (1°C)
Maximum water temperature: 110° F (43°C)

Power

Voltage: 120VAC
Frequency: 60Hz
Power consumption: 7 Watts Maximum

Installation

Location: Indoors (Protect from direct sunlight)
Minimum ambient temperature: 34°F (1°C)
Maximum ambient temperature: 122°F (49°C)

Note:

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before or after

the system.

Teflon

®

is a registered trademark of E. I. du Pont de Nemours

and Company or its affiliates.

Advertising
This manual is related to the following products: