Brother LASER PRINTER MFC-240C - Manual (Page 15)

Setting Up the Machine
13
12 Choosing a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
1
Press Menu.
2
Press 0.
3
Press 1.
4
Press a or b to choose the mode.
5
Press OK.
6
Press Stop/Exit.
For details, see Receive mode Settings in
Chapter 6 of the User's Guide.
13 Sending in the Product
Registration and Test Sheet
(USA only)
1
Fill out the Product Registration and Test Sheet.
2
Put the sheet face down in the ADF (Automatic
Document Feeder) or the scanner glass.
3
Make sure (Fax) is illuminated in Green.
4
Enter the toll-free fax number: 1-877-268-9575.
5
Press Black Start.
Note
You will receive a confirmation fax of your Product
Registration.
You can also register your product online using the
On-Line Registration link from the installation CD-
ROM or visit http://www.brother.com/registration.
Now go to
Go to Supplied CD-ROM ‘MFL-Pro Suite’ on
the next page to install the drivers.
Are you connecting an external telephone or external
telephone answering device to the machine?
Your machine
automatically answers
every call as a fax.
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored on
the external TAD. Fax
messages are printed.
You control the phone
line and must answer
every call yourself.
Are you using the voice
message function of an
external telephone
answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Do you want to use the machine for Fax only?
Manual
Fax Only
Fax/Tel
External TAD
No
Yes
No
Yes
No
No
Yes
Yes
No
Do you use a Distinctive
Ring subscriber service?
Go to Distinctive
Ring in the
chapter 7 of the
User’s Guide.
Yes