HCO Panda GSM sms commands - Manual

SMS Control Function
The HCO Panda GSM can be controlled by sending SMS command to the camera
phone number. The users can send SMS commands to set camera/video mode;
acquire pictures; add/delete email addresses or phone numbers of recipients; show
camer
a’s altitude and longitude.
SMS Switch
In order to use the SMS control function, the user need to set the switch to ON in the
setup process.
The Commander Phone Number
The Phone number 1 you set in the setup process will be the commander phone
number. The commander phone number has the right to delete/add the subordinates
(Phone number 2/3/4). Both the commander and the subordinates have the rights to
send the SMS commands to control the camera.