ETI Sound Systems, INC LHEC20 User Manual

B 52, Matrix-600 specifications, Professional

Advertising
background image

PROFESSIONAL

B 52

-

3383 Gage Avenue, Huntington Park, CA, 90255

Phone: 323-277-4100 Fax: 323-277-4108

National: 1-800-344-4ETI

Internet: www.B-52PRO.com

E-mail: [email protected]

SUGGESTED APPLICATIONS:

Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio / Video *

Home Entertainment System * Live Sound System * Stage Monitoring System * Booth

Monitoring System

MATRIX-600 Specifications

MIXER:

Sensitivity / Impedance (for 1Vrms on PREAMP outputs,

channels’ VOLUME controls and MASTER VOLUME in FCW position)

Ch. 1-4: XLR and 1/4” TRS combo MIC inputs (balanced): 5 mV / 2 k OhmsΩ

Ch. 1-4: 1/4” TRS LINE inputs (balanced):

50 mV / 20 k Ohms

Ch. 5: XLR MIC input (balanced):

5 mV / 2 k OhmsΩ

Ch. 5: 1/4” TRS INSTRUMENT input (mono, unbalanced): 75 mV / 1 M OhmsΩ

Ch. 5: 1/4” TRS STEREO LINE input (unbalanced):

150 mV / 1 M OhmsΩ

Ch. 6: Stereo RCA and 3.5mm mini jack MP3/CD input

(unbalanced):

50 mV / 10 k Ohms

Ch. 7: Stereo RCA HOUSE input

(bypasses MASTER VOLUME):

500 mV / 10 k OhmsΩ

Phantom power on Ch. 1-4:

48Vdc

Channels’ 3-band EQs

Ch. 1-4:

Bass: shelf 150 Hz; +/-9 dB

Mid: 1 kHz; +/-6 dB

High: shelf 8 kHz; +/-9 dB

Ch. 5-6:

Bass: shelf 100 Hz; +/-9 dB

Mid: 2 kHz; +/-6 dB

High: shelf 15 kHz; +/-9 dB

MASTER 7-band EQ:

+/-6dB @ 63 Hz, 160 Hz, 400 Hz,

1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz

SUBWOOFER filter:

100 Hz at -3dB

SUBWOOFER output:

2 Vrms

MONITOR output:

3 Vrms

RECORD output:

0.25 Vrms

AMPlIFIER:

Output power:

2x300Wrms into 4 Ohms

Frequency Response (with filters and EQs disabled):

20 Hz – 20 kHz, +0/-1dB

Total Harmonic Distortion (at -10dB from rated power): <0.05%

Signal/Noise ratio

(A-weighted, reference to rated power):

better than 100dB

lOudSPEAkERS:

Enclosure:

3-Way, rear ported bass reflex, black painted

Woofer:

10” high excursion

Mid range driver:

6.5” transducer

Compression driver:

1” Phenolic on exponential horn

Frequency response:

50 Hz – 20 kHz

X-over frequencies:

500 Hz, 2.5 kHz

GENERAl SySTEM:

Weight: Amp/mixer

29 lbs (13.1 kg)

Weight: Loudspeaker (each)

45lbs (20.4 kg)

Dimensions: Amp/mixer

10” x 17” x 10.25”

(W x H x D)

(254mm x 432mm x 260mm)

Dimensions: Loudspeaker

13.25” x 24” x 12.25”

(W x H x D) (each)

(337mm x 610mm x 311mm)

Note: Specifications are subject to change without notice

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment. This device complies with part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Advertising
This manual is related to the following products: