Nipros FD-400A User Manual

Fd-400a, Nippon video system co.,ltd, Nippon video system co.,ltd intercom

Advertising
background image

Wired Intercom

Headset connector (XLR 4-pin)

Used to connect a headset for output of the intercom.

Tally signal output connector (φ3.5 mini jack)

Used for output of thr tally signal.

POW LED Power indication LED turns on as follows:
Green : When the power is turned on.
Red : When the voltage of the power supply has dropped.

FD-400A connectors (BNC)

Used for connection to other FD-400As

Beltclip Used to fix FD-400A to the belt.

FD-400A

・ Enables to communicate at the same time between all FD-400As connected.

・ Up to ten FD-400As can be connected to by general BNC cables for video signals.

・ Enables to communicate till distance of up to approximately 2 km of the BNC cables connection
extension , in the case of batteries drive.

・ Lightweighting to approximately 270 g in a solid metal body.

・ Enables to operate by two AA batteries.

・ Easy to hear a sound for clear sound quality with equalizer circuit and volume control.

・ Enables to connect to Intercom Station FD-900S.

FD-400A

NIPPON VIDEO SYSTEM CO.,LTD

INTERCOM

86

77

38

HEAD PHONE

SUM3×2

SIDE TONE

SYSTEM SELECT

PROFESSIONAL INTERCOM

PUSH TALK

FD-400A

PROTECH

NIPPON VIDEO SYSTEM CO.,LTD

POW

MIC

TALLY

400A 300A

Battery Holder (2× AA batteries )

MIC LED Microphone indication LED turns on into orange

when the microphone is turned on.

TALLY LED Tally indication LED turns on into red when

the tally signal is input.

OPEN

1

Operating

Instructions

TM

For using FD-400A.
Before operating your FD-400A, please read this manual thoroughly and keep it for future reference.

■Features

■Outsideview and Dimensioms/Parts Names and Functions

NIPPON VIDEO SYSTEM accept no liability whatever for incidental damages arising out of the use or inability
to use the product, including, but not limited to, damage to the camera, etc., corruption or loss of data, lost
business revenue or suspension of business operations.
NIPPON VIDEO SYSTEM accept no liability whatever for damages arising from improper use not conforming to
the instructions in the instruction manuals.

When LED turned into red, please change the battery.
Or please check the external power supply.

HEADPHONE Headphone volume control and power switch

Rotating the knob turns on the power and rotating more it

adjusts the headphone volume level.

SIDE TONE/PUSH TALK Side tone volume control and Talk switch

Pressing the knob turns on the microphone to talk and rotating

more it adjusts the volume level of the side tone of the headset.

SYSTEM SELECT Switch
Set to 400A or 300A according to the system connected.

400A : When only the FD-400As are connected.

300A : When any FD-300As are used tigether.

FD-400A can be connected to up to ten and the BNC cable can be connected to total length 1km.

BNC cable

BNC cable

DL-500 Closed type Over-the-ear Single-earpiece Headset (supplied for FD-400A)
DL-550 Closed type Over-the-ear Double-earpiece Headset (supplied for FD-400A/D)
FD-900S Intercom Station

Input/Output

Type Wired-type, BNC cable connection

Line Impedance 220 Ω

Communication distance maximum 2 km when using internal power supply

Adjustability Headphone volume level, Side tone volume level

Input/Output Connector LINE 2x BNC : Line input and output

HEADSET 1x XLR 4-pin : for Headset DL-500 or DL-550

TALLY 1x φ3.5 Mini-jack : Tally signal output

Microphone Dynamic type

Receiver Dynamic type

DC Power Supply (internal) DC 3 V 2x AA batteries

(external) supplied from FD-900S via the BNC cable

DC Power Consumption approx. 0.03 W Max.

Operating Temperature 0℃ to 40℃ (+32 to 104°F )

Storage Temperature -20℃ to 60℃ (-4 to +140°F )

Dimensions approx. 86 x 38 x 77 mm (excluding protrusions)

Weight approx. 270 g (main body only)

FD-400A(main body)/ Headset DL-500 or DL-550/ Operating Instructions

General

Accessories

1. Open the cover of the battery holder of the FD-400A side and charge two size AA battery dry cells.

2. Connect the BNC cables to each FD-400A.

3. Turn a knob of the headphones Volume Control, and the power turns on.
Gradually turn up the headphone volume control knob and adjust it to hear the voice of the communication

partner moderately .
Adjust the SIDE TONE volume control; the volume that own microphone voice returns to own headphones.

※ When FD-300As are mixed and used together, set the SYSTEM SELECT switch of all FD-400A to the 300A position .
※ It is recommended that the power switch is turned off whenever FD-400A is not used so that battery is not worn down idly.

OPEN

AA battery

OPEN

Open the cover of

the battery holder

Put two AA batteries

(careful about +/- of the battery)

Close the cover.

FD-400A

NIPPON VIDEO SYSTEM CO.,LTD

INTERCOM

FD-400A

NIPPON VIDEO SYSTEM CO.,LTD

INTERCOM

FD-400A

NIPPON VIDEO SYSTEM CO.,LTD

INTERCOM

HEADPHONE Volume

SIDE TONE Volume

SYSTEM SELECT 400A/300A Switch

Set according to connecting to FD-400A or FD-300A.

BNC cable

BNCcable

2

■Use

■Specifications

■Option

NOTE

Features, design and specifications are subject to change without notice.

Power Supply

AA battery

Total cable length up to 2 km.

up to ten

Headset

2
3
1

φ3.5 Mini Jack

φ3.5 Mini Plug

1
2
3

φ3.5 Mini Jack Connection
3 : TALLY signal = 3 V for the TALLY LED
2 : Audio output for test use
1 : GND

HEAD PHONE

SUM3×2

SIDE TONE

SYSTEM SELECT

PROFESSIONAL INTERCOM

PUSH TALK

FD-400A

PROTECH

NIPPON VIDEO SYSTEM CO.,LTD

POW

MIC

TALLY

400A 300A

Advertising