Nipros VC-450 - Manual

VC-450
VF 6-pin Cable
For using VC-450.
Operating
Instructions
Before operating your VC-450, please read this manual thoroughly and remain it for future reference.
■Features
・ Used to connect between the 8.9-inch LCD View Finder LVM-89W and the Camera Adaptor
ES-300, ES-500, LS-700, PS-270 or PS-470.
■Outsideview and Dimensions
■Specifications
Connector
Cable Length
2 HR10A-7P-6P, male
0.6 m
Specifications
0.6 m
・ Used to connect between the VF Interface Unit VIF-100, VIF-100BC or VIF-100P and the Camera
Adaptor ES-500, LS-700 or PS-470.
1 GND
2 DC +15 V Power
3 NC
4 RET VIDEO Signal
5 TALLY Signal
6 NC
6-pin connector
(male)
pinassignment
HR10A-7P-6P
HR10A-7P-6P
・ The RET video signal, DC 15 V power and TALLY signal are supplied together to the monitor.
NOTE Features, design and specifications are subject to change without notice.
NIPROS accept no liability whatever for damages arising from improper use not conforming to the
instructions in the instruction manuals.
NIPROS accept no liability whatever for incidental damages arising out of the use or inability to use
the product, including, but not limited to, damage to the camera, etc., corruption or loss of data, lost
business revenue or suspension of business operations.
TM