Opticron Mounts User Manual

Product & user guide, Optional accessories

Advertising
background image

PO Box 370, Unit 21, Titan Court, Laporte Way, Luton,

Bedfordshire, LU4 8YR, UK

Telephone: +44 (0)1582 726522

Facsimile: +44 (0)1582 723559

Email: [email protected]

© OPTICRON 2013

All rights reserved. No part of this publication maybe reproduced, stored in a

retrieval system or transmitted in any form or by any means electronic,

mechanical, photocopying, recording or otherwise without prior permission.

OPTICRON

®

is a Registered Trade Mark.

All equipment and specifications listed are subject to change

without prior notification.

Product & User Guide

(including Guarantee)

Hide Clamps

Universal Mount

Car Window Mount

Bipod

Monopods

Accessories

Instructions

Make sure all locks and clips are secured before and during use.

Whenever possible remove equipment from the support during
transportation.

Care & Cleaning

Always dry the equipment thoroughly after use in damp or wet
conditions. Avoid contact with salt water.

To clean the equipment, remove excess dirt and dust from moving
parts (threads and sliding sections) using compressed air or a
blower brush. Wash with a mild detergent and dry thoroughly with
a soft cloth.

Whenever possible store in a stable dry atmosphere away from
moisture.

Do not attempt to dismantle the equipment as this will invalidate
the guarantee.

Guarantee

Opticron mounts listed herein are guaranteed for up to 5 years
under the following conditions.
(i) In the case of faults attributable to faulty processing or materials,

we will assume responsibility for the labour and material costs
during the first 2 years after purchase. We reserve the right to
decide whether defective parts should be repaired or replaced.

(ii) During the next 3 years we will assume responsibility for

material costs only, charging corresponding labour costs.

(iii) We will accept no liability for damage caused by incorrect use,

water damage or for any repairs or actions carried out outside
our firm.

Items such as carry straps and foam grips are excluded from the
guarantee.

This guarantee is in addition to and does not affect your statutory
rights.

MGC0113

Optional Accessories

40316 Ball & Socket Panhead

Compact head in aluminium. 1/4” connection to
a tripod, monopod or bipod.
Height 76mm. Weight 107g.

42606 Quick Release Plate & Shoe

Screws directly onto panhead. 1/4” thread.
Weight 177g.

42608 Quick Release Plate only

Weight 79g.

Advertising