Clarion BLT370 - Manual (Page 22)

22
BLT370
• To reject a call
User can reject an incoming call with this Transceiver unit.
1. When the car handsfree rings, press the [ ] button once.
Note:
• This is dependent on the type of phone.
• Ending a call
Use either one of the following methods to end a call:
1. To end a call from the Transceiver unit, press the [ ] button once.
2. End a call from the phone’s keypad.
Note:
• When making outgoing call from a mobile phone, call cannot be terminated using
the Transceiver unit. It can only be ended when the call is connected (conversation).
Simply use the phone “END” key in order to terminate an outgoing call.
Transferring a call
• To transfer the call to the phone
During a call, press the [ ] button twice.
• To transfer the call to the Transceiver unit
During a call, press the [ ] button twice or use the transfer call function
in the phone to transfer call back to car stereo.
Note:
• This function is dependent on the type of phone. Some phones are not
supported.
5. OPERATIONS FOR BLUETOOTH
®
AUDIO/MOBILE-
PHONE TRANSCEIVER UNIT
1EN_OM_Receiver BLT370.indd 22 8/15/07 3:10:43 PM