CatEye Q3 - Manual (Page 21)

ENG-20
Before use
Formatting/Restarting operation
There are 2 different wristwatch set-up operations; formatting and restarting operations.
Follow the appropriate one depending on the situation.
Formatting : When you want to delete all data and the setup of the wristwatch.
Restarting : When you use the unit for the first time after purchasing, or after replac-
ing batteries, or an error is displayed.
In the restarting operation, the following data are retained. *
SPORTS MENU Date
OPTION MENU Setting the target zone
DATA MENU
• Saved file data
• Ride data
• Log data
SETUP MENU
• Alarm clock setting
• Tire circumference and
Sensor currently selected
• Sensor ID
• Measurement unit
• Record interval
• Auto-mode
• Training function
• Sound setting
Flows of the formatting and restarting operations
The formatting and restarting procedures are as follows.
In the case of the formatting operation, you can set the “tire circumference” *
and “measurement unit” sequentially after you set the “clock/date”. Each
set-up procedure is described on the page referenced.
After you complete the set-up, be sure to synchronize the sensor ID according
to the Setup mode “Searching for sensor ID” (page 52).
For restarting:
The date when last executed the restarting *
operation will be initially displayed.
Restarting operation (page 13)
Setting the clock/date (page 14)
Clock mode
For formatting:
Formatting operation (page 13)
Setting the clock/date (page 14)
Selecting measurement unit (page 17)
Tire circumference input (page 15)