CatEye Q3 - Manual (Page 55)

ENG-54
Setup mode
Setting the measurement unit UNITS
Change the speed unit.
Stop measurement and perform the resetting operation (page 26) before you change *
the unit. Unless you perform the resetting operation, “DATA RESET” appears on the
screen, preventing change of the unit.
1.
Press and hold the MENU button in the Clock mode or Sports
mode until “SETUP MENU” appears on the screen.
It switches to “CLOCK DATE” automatically.
Switch modes :
MENU
(press & hold)
2.
Switch to “UNITS” pressing the MODE1 or MODE2 button,
and then confirm it pressing the SSS button.
Switch screen :
MODE2
MODE1
(or)
Confirm :
SSS
3.
Select the speed unit pressing the MODE1 or MODE2 button.
km/h ↔ mph :
MODE2
MODE1
(or) Confirm :
SSS
Pressing the 4.
MENU button confirms the change, and returns
to the Setup mode “UNITS”.
Press the MENU button repeatedly to switch to another mode.
To the mode top/switch the mode :
MENU
After the measurement unit is switched, the total distance measured in the past is *
automatically converted to the new unit.
Current speed unit