Syba SY-UEN-35-NF - Manual

Installation Manual
Introduction
This 3.5” enclosure is designed to provide a solution to connect
existing storage devices such as 3.5” IDE hard drive to USB2.0.
This 3.5” enclosure can provide peak data transfer rate up to
480Mbps for USB 2.0 interface.
Features
General
z Support
plug-n-play. Hot- Swap and Wake-UP.
z
Accommodate all existing storage devices such as 3.5” IDE
hard drives.
z Support
Self power mode.
z
Support Windows98. 98SE, ME, 2000 and XP operating
system.
USB 2.0
z
Compliant with Universal serial Bus Specification Revision
2.0
z Compliant
with ATA/ATAPI-6 Specification
z
Support LBA 48, PIO Mode 0-4, DMA Mode 0-2, UDMA Mode
0-5
z
Compliant with USB Mass Storage Bulk only Specification 1.0
z Support
High-Speed (480Mbps) and Full-Speed (12Mbps)
mode