tekmar 003 Relay - Manual

Relay 003 - 24 V (ac) Coil
Installation & Operation Manual
D003
05/11
Accessories Replaces:01/10
1 of 4 © 2011 D 003 - 05/11
The tekmar Relay 003 - 24 V (ac) is for use
in applications where device operation
requires a voltage that differs from the
control’s built-in inputs or outputs. They
can also be used in applications where the
device operation requires a higher current
than the on board relay is rated for.
Relay 003 is energized with 24 V (ac) •
Introduction
Features
Test button
Red LED indicator
Pluggable base •
•
•
Benefi ts
Mounts to TS35 DIN Rail
Pre-wire and test base before
plugging in relay
Replace relay without
disturbing wiring •
•
•
Note
For 120 V (ac) coil relay see
D004 •