Programming – Canon VendaFax VF-1 User Manual

Page 11

Advertising
background image

Corporate Headquarter: 16381 Cherokee Road Brooksville, Florida 34601 352-796-2693

Factory: 21B Squires St. Cortland, NY 13045 607-428-0627






Here is a photo of the sensor location on the Samsung C8380ND.

Use caution when installing the sensor so that it does not interfere with the normal operation of the
copier

You are now ready to apply power and begin programming your VendaFax.

Programming

The chart below shows the DIP switch meaning and use in programming. Please refer to this chart
when programming your VendaFax module.

Switch 1 - On Position – Reserved for future use
Switch 1 – Off Position – Incoming ring detection disabled from sending fax device.
Switch 2 – On Position – Bypass mode.
Switch 2 – Off Position – Normal Operating mode.
Switch 3 – On Position – Pulse Test.
Switch 3 – Off Position – Normal Operating mode.
Switch 4 – On Position – Program mode.
Switch 4 – Off Position – Normal Operating mode.

Please refer to the photo below for switch numbering, on and off positions.

Advertising