Craftsman 0220 - Manual (Page 44)


SeCTIoN 10: MAINTeNANCe
INSPeCTIoN, SeRVICe & MAINTeNANCe
10.1 Inspection, Service & Maintenance Summary Charts
You must inspect, maintain and service your trailer regularly to insure safe and
reliable operation. If you cannot or are unsure how to perform the items listed here,
have your dealer perform them.
Note: In addition to this manual, also check the relevant component
manufacturer’s manual.
Inspection and Service before each Use
Item Inspection/Service Manual Section Reference
Coupler and Hitch Ball Check for cracks, pits, and
flats. Replace w/ball & coupler
having trailer GVW Rating
Grease
Check locking device & replace
Section 10.2.3.1
Safety Chain(s) & Hooks Check for wear and damage Sections 8.1 & 8.2
Tires
• Air Pressure
Check tire pressure when cold
Inflate tires to 80 psi
Sections 6.6, 9.2 & 10.2.6
Wheels
• Lug Nuts (Bolts) & Hub
Check for tightness
Tighten to 95 - 120 ft/lb. Do
not exceed 120 ft./lb. For new
and remounted wheels, check
torque after first 10, 25 & 50
miles of driving and after any
impact
Section 6.5.7 & 9.1
Sections 10.2.8, 10.2.8.1 & 10.2.9
Inspection and Service each 3 Months or 3,000 Miles
Item Inspection/Service Manual Section Reference
Structure
• Hinges, Doors
Inspect. Repair or replace
damaged, worn or broken parts
Section 10.2.2.1
Wheels
• Rims
Inspect for dents, damage or out
of round
10.2.7
Tires Inspect for cuts wear and
bulging
Basic tire maintenance
Sections 6.4, 6.4.1, 6.4.2, 6.4.3,
6.4.4, 6.4.5, 6.4.6, 6.4.7, 6.4.8,
6.4.9, 6.4.10, 6.4.11, 6.6 & 10.2.6
Inspection and Service each 6 Months or 6,000 Miles
Item Inspection/Service Manual Section Reference
Tires Rotate @ 5,000 miles Section 10.2.6
Wheels
• UNSEALED Bearings (Hubs)
Check and confirm free running.
Replace if not.
Disassemble / inspect / as-
semble and repack. Replace
promptly if immersed in water
Section 10.2.7 & 10.2.8
Section 10.2.8.1