Canon SX6 - Manual (Page 102)

102
SE
TTING
UP FU
NCTIO
NS FROM MEN
US
Registering a Password
[Register password]
You can register a password that you need to
enter when turning on the projector.
T
T
T
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[<], and [>], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Resetting the Lamp Counter
[Lamp counter]
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
T
T
T
z If the time of use is less than 1,000 hours
(1,840 hours for SX60)
z If the time of use is 1,000 to 1,400 hours
(1,840 to 2,500 hours for SX60)
z If the time of use is 1,400 hours or longer
(2,500 hours or longer for SX60)
z If you replace the lamp
System settings
Other settings
Register password
z Press the [MENU] button without
entering a password if you want to
cancel registering the password.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
<
<
System settings
Other settings
Lamp counter
Resets the lamp counter.
Cancels resetting the lamp counter.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
OK
Cancel