Turning off the projector – Canon SX6 User Manual

Page 53

Advertising
background image

53

PROJECTIN

G AN IMAGE

FROM TH

E COMPUT

ER

Turning Off the Projector

1

Press the [POWER] button.

A confirmation message appears on the screen.

To continue projection, wait until the confirmation message disappears (approximately
4 seconds) or press a button other than the [POWER] button.

2

Press the [POWER] button again while the confirmation message is displayed.

The lamp goes off, the [POWER] indicator starts flashing in red, and it starts cooling
the lamp.

3

Remove the power cord from the AC outlet.

It continues to cool down the lamp even after removing the power cord.

z You may shorten the lamp life if turning off the projector while its lamp is still in an unstable

state shortly after turning on the projector. Wait at least 5 minutes before turning off the pro-
jector.

z Wait at least 5 minutes before turning on the projector when you turn off the projector. It may

shorten the lamp life if you turn on the projector immediately after turning it off.

z Using the projector for a long time may shorten the life of the lamp and internal optical com-

ponents.

z When the projector is turned off, it starts cooling the lamp. You cannot turn it on during the

process.

Advertising
This manual is related to the following products: