Canon SX6 - Manual (Page 60)

60
PRO
JE
CTIN
G AN IMAGE
FROM A
V
EQU
IPME
NT
Performing the Auto Setup
With the auto setup function, the following set of adjustments is performed automatically
when projecting a video image from an AV equipment. You can start the projection only
with this operation if the input signal has been appropriately selected.
1
Select [DIGITAL VIDEO].
Perform the steps shown in the "Selecting DIGITAL VIDEO" section on page 61 before
performing the auto setup if you want to project a digital content video image.
Skip this step if [DIGITAL VIDEO] has been selected at the previous projection.
2
Press the [AUTO SET] button.
The [Auto setup] window appears.
Auto focus
Adjusts the focusing automatically.
Auto keystone
Corrects the keystone distortion automatically.
Auto input
Sets the image input signal automatically.
Auto screen color*
Performs the screen color correction (white balance adjustment) automati-
cally.
*: This is not enabled at the factory.
z Among 4 functions above, the function that has been enabled in the menu is performed dur-
ing the auto setup. "Auto focus", "Auto keystone", and "Auto input" are enabled in the factory.
z You can manually set or adjust each function. You can set or adjust a specific function inde-
pendently if you press the [AUTO SET] button during the manual adjustment.
z Select [Greenboard] from [Screen color] when using a greenboard (dark green) as a screen
(P86).
z The auto focusing and the screen color correction may not be performed properly depending
on the brightness of the room or the condition of the screen. Adjust the image manually if such
is the case.