Canon SX6 - Manual (Page 87)

87
SE
TTING
UP FU
NCTIO
NS FROM MEN
US
Setting Display Status from the Display Settings Menu
Selecting a Logo Display Position
[Logo position]
You can select a logo display position. You can
place the logo at the center or a corner of the
screen as you wish.
T
T
T
Press the [MENU] button when you finish.
Displaying a Logo (No signal screen)
[No signal screen]
You can display a logo on a screen when there is
no input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
Display settings
User screen settings
Logo position
Select a position you want to dis-
play a logo and press the [OK] but-
ton.
z You cannot select [Logo position] if
you have not captured a logo on the
[Logo capture] screen.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Upper L
Upper R
Center
Lower L
Lower R
Display settings
User screen settings
No signal screen
Displays no logo (black screen).
Displays no logo (blue background).
Displays a logo captured on the
[Logo capture] screen.
z You cannot select [User logo] if you
have not captured a logo on the [Logo
capture] screen.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Black
Blue
User logo