Selecting a logo at startup, Displaying a logo (no show) – Canon SX6 User Manual

Page 88

Advertising
background image

88

SE
TTING

UP FU

NCTIO

NS FROM MEN

US

Displaying a Logo (NO SHOW)

[NO SHOW]

You can display a logo on a screen when the
projected image is blackened out temporarily by
pressing the [NO SHOW] button.

T

T

T

Press the [OK] button to confirm, and then press
the [MENU] button.

Selecting a Logo at Startup

[Projector on]

You can display a specified logo on a screen
from the moment the projector is turned on to the
moment it is ready for projection.

T

T

T

Press the [OK] button to confirm, and then press
the [MENU] button.

Display settings

User screen settings

NO SHOW

Displays no logo (black screen).

Displays no logo (blue background).

Displays a logo captured on the
[Logo capture] screen.

z You cannot select [User logo] if you

have not captured a logo on the [Logo
capture] screen.

DIGITAL PC

ANALOG PC

DIGITAL VIDEO

COMP./SCART

VIDEO/S-VIDEO

Black

Blue

User logo

Display settings

User screen settings

Projector on

Displays the Canon logo captured
at the factory.

Projects an image immediately after
turning on the projector.

Displays a logo captured on the
[Logo capture] screen.

z You cannot select [User logo] if you

have not captured a logo on the [Logo
capture] screen.

DIGITAL PC

ANALOG PC

DIGITAL VIDEO

COMP./SCART

VIDEO/S-VIDEO

Canon logo

Skip

User logo

Advertising
This manual is related to the following products: