Skip the power button operation, Enabling / disabling the beep, Enabling/disabling the beep – Canon SX6 User Manual

Page 97

Advertising
background image

97

SE
TTING

UP FU

NCTIO

NS FROM MEN

US

Setting Various Function with the System Settings Menu

Skip the POWER Button Operation

[Direct power on]

You can set the projector to be turned on when
you connect the power cord.

T

T

Press the [OK] button to confirm, and then press
the [MENU] button.

Enabling/Disabling the Beep

[Beep]

You can enable/disable the beep when you
press a button on the top control or remote con-
trol.

T

T

Press the [OK] button to confirm, and then press
the [MENU] button.

System settings

Direct power on

Enables the direct power on func-
tion.

Disables the direct power on func-
tion.

z Wait at least 5 minutes before turning

on the projector when you turn off the
projector with the direct power on
function. It may shorten the lamp life if
you turn on the projector immediately
after turning it off.

z Set the previous [Power management

mode] to [Standby] or [Exit] in addi-
tion to this setting if you want to
enable the direct power on function.

DIGITAL PC

ANALOG PC

DIGITAL VIDEO

COMP./SCART

VIDEO/S-VIDEO

Off

On

System settings

Beep

Disables the beep.

Enables the beep.

z It does not beep if you mute the pro-

jector sound temporarily with the
[MUTE] button.

DIGITAL PC

ANALOG PC

DIGITAL VIDEO

COMP./SCART

VIDEO/S-VIDEO

Off

On

Advertising
This manual is related to the following products: